XYZ Racing Drag Racing Coilovers — Nissan SKYLINE R33 BCNR33 4WD (Rear FORK) 1995-1998

The BCNR33’s ATTESA E-TS all-wheel drive sends torque rearward until the fronts are needed, which makes the launch the single biggest variable in a quarter-mile pass. The XYZ Racing Drag Racing coilover for the Nissan Skyline R33 BCNR33 4WD is built around that exact moment: managing how the chassis loads and unloads as the RB26 lights both turbos off the line.

This is not a fast-road or circuit setup repurposed for the strip. It is a 0-400 specialist, tuned to plant the driven tyres hard at launch and keep the car tracking straight as boost builds and the AWD system shuffles drive front to rear.

What this coilover does for your 1995-1998 Nissan Skyline R33 Bcnr33 4WD (Rr Fork)

The damping is set to encourage deliberate rearward weight transfer the instant you drop the clutch, loading the rear tyres so they bite rather than spin. On a heavy RB26 GT-R that idle time before the wheel hooks up is where 60-foot times are won or lost, and the spring and valving balance here is aimed squarely at cutting it. As speed climbs, the rear-fork lower mounts and firmer high-speed control keep the BCNR33 settled and stable instead of getting light or wandering near the top of third. You get a car that leaves consistently and stays composed all the way to the traps.

About the Drag Racing coilover

XYZ Racing developed this Drag Racing range specifically for 0-400 metre work across front-, rear- and four-wheel-drive platforms, with the four-wheel-drive tune used here for the BCNR33. The core idea is controlled weight shift: the setting allows the car to move load front to rear in instant driving conditions so the driven tyres see greater compression at the critical moment. That extra loading forces the contact patch down, reduces wheelspin and the dead time before the tyre hooks, and improves stability once the car is moving at high speed. Construction uses the rear-fork lower mount arrangement to suit the R33 GT-R subframe. Everything is biased toward repeatable launches rather than ride comfort or apex precision.

Fitment for the Nissan SKYLINE R33 BCNR33 4WD (Rr FORK) (1995-1998)

Engineered for the BCNR33 chassis Skyline GT-R, 1995 to 1998, in four-wheel-drive specification with the rear-fork (Rr Fork) lower mounting. Chassis code NI39. Confirm your build matches this fork-type rear mount before ordering.

What buyers also search for

• Nissan Skyline R33 BCNR33 coilovers set up for drag launches
• R33 GT-R suspension that controls weight transfer off the line
• Four-wheel-drive Skyline drag coilovers with rear-fork lower mounts
• BCNR33 RB26 quarter-mile suspension for consistent 60-foot times

Pick your spring and damping spec for the BCNR33 and configure yours below.