XYZ Racing Pro Rally Coilovers — Mitsubishi COLT PLUS 2007-2013

The COLT PLUS carries a taller, longer body than the standard Z30 Colt hatch, and that raised roofline sits a higher mass over the front axle than most small Mitsubishis. On a loose surface that matters: weight transfer arrives quickly, the nose loads hard under braking, and the standard dampers run out of travel and control long before the driver does. The XYZ Racing Pro Rally coilover for the Mitsubishi COLT PLUS exists to take that abuse repeatedly without fading.

This is the top-flight rally end of the XYZ range, built for gravel and snow stages rather than smooth tarmac. It is competition hardware first and a road comfort upgrade a distant second, so spec it because you intend to compete or build seriously, not because you want a lower stance on the school run.

What this coilover does for your 2007-2013 Mitsubishi COLT PLUS

Fitted to the COLT PLUS, the Pro Rally setup gives you the long-travel damping a loose surface demands, soaking up ruts, crests and compressions that would bottom a road damper. The result is a front end that keeps biting through corrugations and a rear that stays planted over jumps and camber changes. You gain ride-height adjustment to set the car up for the surface, and damping control that recovers between hits instead of packing down. For a front-driven car like the COLT PLUS, that translates directly into more usable traction out of slow corners and a more predictable platform when you lift mid-bend.

About the Pro Rally coilover

XYZ Racing splits its rally gravel and snow programme into two distinct builds, and the Pro Rally sits at the professional end. The first build is the amateur specification, designed to bolt straight to the original chassis with no bodywork changes – the sensible starting point for a grassroots COLT PLUS. The second, the professional specification this kit represents, is intended to be fitted after the car body has been modified, giving the geometry and travel that a properly prepared competition shell can exploit. These are genuine stage suspensions rather than fast-road kits with rally badging, engineered for the heat, impact loading and repeated full-travel cycling that gravel and snow events inflict. Confirm which build path suits your project before ordering, because the professional fit assumes chassis preparation.

Fitment for the Mitsubishi COLT PLUS (2007-2013)

This kit is matched to the Mitsubishi COLT PLUS, MT11 chassis code, across the 2007 to 2013 production span. Only specifications listed in the product data apply – confirm your exact chassis code and build year against the configurator before committing, particularly if your car has already been modified for the professional fitment route.

What buyers also search for

• Mitsubishi COLT PLUS rally coilovers for gravel and snow stages
• MT11 chassis competition suspension with long-travel damping
• Mitsubishi COLT PLUS coilover options for amateur and professional rally builds
• Adjustable ride height suspension for the 2007-2013 COLT PLUS
• COLT PLUS front-wheel-drive rally setup for loose-surface traction

Choose your amateur or professional build path and configure your Pro Rally coilovers for the COLT PLUS below.