Mg ZS 2023-2026 — Coilovers

The MG ZS rolls out of the factory as a tall, comfort-led compact crossover – soft springs, a high centre of gravity and damping tuned for the supermarket run rather than a quick B-road. A coilover kit is the single change that reshapes how the MG03 carries itself, dropping the ride height and taking the slack out of that factory float.

The XYZ Racing coilover range for the 2023-2026 MG ZS spans six builds – Super Sport, Top Sport, Racing Spec, Tarmac Rally, Drift Spec and Circuit Master – so you can match the kit to how the car is actually used, from a lowered fast-road daily to a dedicated circuit setup.

What this coilover does for your 2023-2026 MG ZS

Fitting coilovers to the MG ZS attacks the two things owners notice first: the height and the roll. Winding the ride height down lowers the crossover’s stance and drops the centre of gravity, which immediately settles the body through roundabouts and motorway lane changes. Firmer, adjustable damping reins in the nose-heavy front-drive layout, so the ZS stops leaning on its outside front tyre and tucks into a corner instead of washing wide. On a rough UK B-road the secondary float disappears – the car tracks flatter over crests and stays composed under braking. Set soft for fast-road comfort or wound up for track stiffness, the same kit covers daily driving and a weekend on circuit.

About the coilover range

XYZ Racing builds this range as a set of full-coilover kits rather than a lowering-spring bolt-on, which is what makes ride height and corner balance adjustable on the car. Across the six specs the intent shifts with the name. Super Sport is the fast-road starting point, trading a little comfort for control without punishing UK tarmac. Top Sport leans towards track-day use with a firmer base setting. Racing Spec and Circuit Master sharpen things further for repeat circuit sessions, while Tarmac Rally is built for the broken, high-load surfaces of stage and back-road work. Drift Spec sits at the extreme end for lock and angle. Each shares the threaded-body adjustment that lets you set ride height to suit your MG ZS and the look you are after.

Fitment for the MG ZS (2023-2026)

These kits are mapped to the current MG ZS on the MG03 platform, covering the 2023 to 2026 model years. Confirm your car falls inside that build window and chassis code before configuring, and check the chosen type’s spec sheet for its adjustment detail. Fitment is matched to this generation – the earlier ZS runs a different platform.

What buyers also search for

• MG ZS coilover kit for lowering a tall crossover stance
• MG ZS suspension upgrade for fast road and the occasional track day
• Adjustable MG ZS coilovers for the 2023-2026 MG03 platform
• MG ZS handling upgrade to cut body roll and front-end understeer
• Choosing between Super Sport and Top Sport coilovers for an MG ZS

Pick the XYZ Racing spec that matches how you actually drive your MG ZS, then configure yours below.