XYZ Racing Street Advanced Coilovers — Mercedes-Benz E CLASS COUPE C207 4 CYL (Cancellation Kit for Electronic Damping) 2009-2017

The E-Class Coupe C207’s factory air suspension and electronic damping control were built for motorway comfort, not for a driver who wants the chassis to tell the truth about what the front axle is doing mid-corner. Fitting a coilover kit on this chassis means removing that electronic layer first – which is exactly what the cancellation kit in this package handles, so the Street Advanced dampers can take over without fault codes or conflicting inputs from the original air management system.

For a 4-cylinder C207 covering both petrol and diesel variants from 2009 to 2017, Street Advanced is the sensible step up from stock: firm enough for a Sunday B-road without turning the coupe into something you dread on a motorway commute.

What this coilover does for your 2009-2017 Mercedes Benz E Class Coupe

Swapping out the air struts for a coil-over-shock assembly gives you a fixed, mechanical baseline instead of a system that’s constantly adjusting itself in the background. With 720 damping increments to work through, you can settle on a compression and rebound setting that suits how you actually drive the car – softer for daily motorway miles, firmer once you’ve found a road you know well. Ride height is adjustable independently of spring preload, so you can correct the nose-heavy stance the C207 often develops as the front springs age, and tighten up body control under trail-braking into a corner. The coupe’s body control off-throttle mid-corner improves noticeably once the vague, self-levelling air suspension is out of the equation.

About the Street Advanced coilover

Street Advanced is the most widely fitted kit in the XYZ Racing range, built over years of development and refined through use in racing events worldwide before being carried over into a road-focused specification. It’s positioned for owners who split their time between normal road use and occasional track days rather than one or the other exclusively. The 720-way damping adjustment is the headline figure here – enough range to move from a compliant daily setting to something noticeably firmer for a circuit session without swapping components. Construction follows XYZ’s standard coilover format: a shock body paired with a wound spring on a threaded collar, allowing independent height and preload adjustment rather than a fixed-drop setup. It’s built for drivers who want direct control over how their car behaves rather than accepting whatever the factory calibration decided.

Fitment for the Mercedes Benz E Class Coupe (2009-2017)

This kit is specified for the C207 E-Class Coupe, 4-cylinder engine variants, across the 2009 to 2017 production run, and includes the cancellation kit required to disable the factory electronic damping system so the mechanical dampers operate without interference. Confirm your chassis code and engine configuration against your V5C before ordering, since the C207 range spans several drivetrain and engine combinations across this period.

What buyers also search for

• Mercedes E Class Coupe C207 coilover conversion from air suspension
• C207 electronic damping cancellation kit for aftermarket coilovers
• Mercedes E Class Coupe adjustable ride height suspension upgrade
• 4-cylinder C207 suspension setup for road and occasional track use
• Street Advanced damping range for a Mercedes coupe daily driver

Configure your Street Advanced spec for the C207 below and set the ride height and damping range to match how you’ll actually use the car.