Honda ELYSION RR1 2004-2013 — Coilovers

The Elysion RR1 carries its mass high and well forward, and that combination is exactly what a soft factory MPV setup struggles with the moment you load it up or push it through a roundabout with intent. This XYZ Racing coilover range for the Honda Elysion RR1 2004-2013 swaps the long-travel, roll-prone original suspension for a height-adjustable, damper-controlled platform sized for a heavy people-mover rather than a hatchback.

This is a family listing, so you pick the specification that suits how the van is used. A lowered, composed stance for daily duty, firmer control for quicker road driving, or a harder competition-leaning build – each variant is built on the same threaded-body coilover foundation engineered around the RR1’s kerb weight and ride-height range.

What this coilover does for your 2004-2013 Honda Elysion RR1

The most obvious change on a vehicle this tall is roll control. Dropping the ride height pulls the centre of gravity down, and the threaded spring platforms let you set that drop precisely, so the Elysion sits flatter through corners instead of leaning onto its outer tyres. Under braking the nose dives less, and with a full cabin of passengers the rear settles rather than wallowing. On the damping-adjustable specifications you can firm the van up for a loaded motorway run or soften it back for comfort, which matters far more on an MPV than it ever would on a stripped track car.

About the XYZ Racing coilover range

XYZ Racing builds these as full threaded-body coilovers, with adjustable lower mounts so ride height is set independently of spring preload. The range spans six specifications: Super Sport for fast-road use, Top Sport aimed at track days, Racing Spec and Circuit Master for harder competition work, Tarmac Rally for rough-surface stage use, and Drift Spec for high-angle sliding. Each shares the same core construction but is valved and sprung to suit its intended job, so the version you choose changes the spring rates and damping character rather than the fundamental hardware. For a vehicle as heavy as the Elysion, that breadth lets you lean towards stance and comfort or towards body control without leaving the platform.

Fitment for the Honda Elysion RR1 (2004-2013)

This kit is specified for the Honda Elysion RR1 chassis across the 2004 to 2013 model years. Confirm your chassis code reads RR1 before ordering, as the wider Elysion family used several chassis designations over its life.

What buyers also search for

• Honda Elysion RR1 coilovers for a lowered, level stance
• Honda Elysion RR1 suspension upgrade to cut MPV body roll
• Adjustable coilovers for the 2004-2013 Honda Elysion that keep loaded ride quality
• Height-adjustable Elysion RR1 coilovers for road and occasional track use

Compare the six specifications and configure yours below.