XYZ Racing Pro Rally Coilovers — Honda ACCORD CD3/4/5/6 1993-1997

Honda’s fifth-generation Accord ran double wishbones at all four corners, a layout that hands the CD3/4/5/6 cleaner camber control through suspension travel than the strut setups most of its rivals used. On a loose stage that geometry is an asset worth protecting, and a rally coilover is how you keep the tyre planted while lifting the car clear of ruts and crests. The Pro Rally kit is built for exactly that brief.

This is the top-flight competition end of the XYZ Racing range, aimed at gravel and snow rather than fast road or circuit work. It trades the supple compliance of a road setup for the travel, damping authority and ride-height range a stage car needs once the surface stops being smooth.

What this coilover does for your 1993-1997 Honda Accord CD3/4/5/6

Raising the CD Accord on adjustable spring perches gives you the ground clearance to attack rough gravel without grounding the sump or scrubbing the arches, while the firmer rally valving controls the body movement that soft road dampers simply cannot catch over repeated hits. You get the height back for the conditions, then the damping to keep all four contact patches loaded through compressions and landings. For a front-drive Accord that means more usable traction out of slow corners and a front end that follows your steering rather than washing wide when the surface breaks up.

About the Pro Rally coilover

XYZ Racing builds the Pro Rally as a dedicated gravel and snow competition suspension, and it comes in two install philosophies. The amateur specification bolts straight to the original Accord chassis, so a club-level crew can fit it without cutting metal. The professional specification is designed to go in after the bodyshell itself has been modified, the route a seriously prepared stage car takes to recover travel and mounting strength. Both share the same loose-surface intent: long-travel damping, height adjustment for changing conditions, and the structural margin to survive stage abuse rather than a Sunday B-road.

Fitment for the Honda Accord CD3/4/5/6 (1993-1997)

This kit is matched to the CD3, CD4, CD5 and CD6 Accord, chassis code HN03, across the 1993 to 1997 build years. It suits the front-wheel-drive fifth-generation car. Confirm your exact chassis code and how far your shell is prepared against the two install specifications before ordering.

What buyers also search for

• Honda Accord CD3/4/5/6 rally coilovers built for gravel and snow competition stages.
• 1993-1997 Accord suspension upgrade with adjustable ride height for changing surfaces.
• HN03 Accord competition coilover that keeps the front tyres loaded over loose ground.
• Front-wheel-drive Accord rally suspension in club-level bolt-in and pro modified-shell specs.
• Fifth-generation Accord stage suspension that swaps road compliance for travel and damping control.

Set your ride height and pick the right install option below, then build yours to match your stage car.