Honda ACCORD CA1/2/3/4/5/6 1985-1989 — Coilovers

The third-generation Accord was the car that put double wishbones on all four corners of an ordinary Honda saloon, and four decades on that geometry is exactly why a CA-chassis car still responds to a proper suspension setup. The XYZ Racing coilover range for the Honda Accord CA1/2/3/4/5/6 1985-1989 swaps tired factory dampers and sagging springs for height-adjustable, rebuildable hardware built around that original wishbone layout.

By now most of these Accords are riding on dampers long past their service life, so the gain here is not marginal. With ride height under your control – and damping too on the adjustable series – you can drop the car without wrecking the front-end geometry that made this generation handle the way it did.

What this coilover does for your 1985-1989 Honda Accord CA1/2/3/4/5/6

On a light, front-wheel-drive chassis like the CA Accord, worn springs show up first as float over crests and lazy turn-in. A fresh coilover platform tightens both. You get controlled body roll, a flatter attitude under braking, and a front axle that bites instead of washing wide. Lowering the ride height drops the centre of gravity and sharpens the steering response, while the threaded platform lets you corner-balance the car rather than living with whatever the previous four decades left behind. On the damper-adjustable series, you can run a firmer setting for B-road work and back it off for the commute.

About the XYZ Racing coilover range

XYZ Racing builds this fitment as a full coilover – threaded shock body, adjustable lower mount and matched spring rather than a lowering spring on a stock strut. The CA1/2/3/4/5/6 is offered across eight series, each tuned for a different job: Street Advanced and Super Sport for fast-road comfort and bite, Top Sport and Circuit Master for track-day duty, Racing Spec for the committed end of that, Tarmac Rally and Gravel Rally for stage surfaces, and Drift Spec for lock and angle. The damper-adjustable kits let you tune compression and rebound feel, and the bodies are designed to be serviced and rebuilt rather than binned when they wear.

Fitment for the Honda ACCORD CA1/2/3/4/5/6 (1985-1989)

This kit is cut for the CA-series Accord built between 1985 and 1989, covering the CA1 through CA6 saloon and Aerodeck variants on the original double-wishbone front and rear. Confirm your exact chassis designation against the year range before you order; the platform suits the standard CA suspension pickup points.

What buyers also search for

• Honda Accord CA1-CA6 coilover kit for fast road and track use
• 1985-1989 Accord suspension upgrade to replace worn factory dampers
• Height-adjustable coilovers for the third-generation CA Accord
• Honda Accord CA chassis lowering setup that keeps the double-wishbone geometry usable
• Rebuildable coilovers for a classic Japanese saloon build

Pick the series that matches how you drive your CA Accord and configure your spec below.