XYZ Racing Drift Spec Coilovers — Chevrolet CORVETTE C7 (Cancellation Kit for Electronic Damping) 2013-2019

The C7 Corvette arrived from the factory with Magnetic Ride Control wired into every corner, and for anyone planning to lock the rear axle sideways at Mallory Park or Goodwood, that electronic damping is the first thing in the way. This XYZ Racing Drift Spec coilover kit ships with the cancellation harness needed to take the C7’s MagneRide ECU out of the conversation entirely, leaving a fully manual, mechanically tunable platform underneath the LT1.

That matters on a drift car. The C7’s transaxle layout and 50/50 weight balance are a gift for initiation, but the OEM dampers were tuned for grip retention – the exact opposite of what a competitive drift setup needs. This kit is built specifically for that job.

What this coilover does for your 2013-2019 Chevrolet Corvette C7

Drift-spec valving lets you stabilise the body through high-speed transitions and hold an aggressive angle without the rear stepping out of phase with the front. With the MagneRide cancellation kit in line, the dash stops throwing damper fault codes and the suspension finally responds to whatever spring and damper changes you make at the corner – not what the ECU thinks you should have. Ride height drops to a sensible competition stance, the bump stroke is set for the work the car is about to do, and the steering loads up predictably as you trail the brake into entry. The result is a Corvette that feels mechanically obedient when you’re holding 60 degrees of slip rather than fighting its own electronics for control.

About the Drift Spec coilover

Drift Spec is XYZ Racing’s purpose-tuned drift platform – not a road coilover with stiffer springs, but a setup engineered around the demands of competitive drifting. The valving philosophy is built around stabilising the chassis through fast direction changes so the car holds a clean, repeatable angle once the rear is hung out. Bump stroke is calibrated for the lowered ride height drifters actually run, so the car still has usable suspension travel where it counts. On the C7 specifically, the kit includes the electronic damping cancellation harness, which decouples the factory MagneRide ECU and lets the mechanical setup work as designed without electronic intervention or warning lights. Pair it with the right spring rates for your engine output and tyre choice, and the controllability through transition is where this kit earns its name.

Fitment for the Chevrolet Corvette C7 (2013-2019)

Direct fit for the C7-generation Corvette (chassis code CH04-C), covering model years 2013 through 2019. This variant is the cancellation-kit version, which includes the MagneRide bypass harness required for cars originally fitted with Magnetic Ride Control. If your C7 was specified without MagneRide, the standard Drift Spec listing is the correct part.

What buyers also search for

• Chevrolet Corvette C7 drift coilover with MagneRide cancellation
• C7 Corvette suspension upgrade for competition drifting
• Adjustable coilover for 2013-2019 Corvette C7 with electronic damping bypass
• Corvette C7 drift setup with manual damper control
• C7 ride-height and damper kit for circuit and drift use

Configure your spring rates and damper preferences below to build the exact Drift Spec setup for your C7.