Chevrolet CORVETTE C7 (Cancellation Kit for Electronic Damping) 2013-2019 — Coilovers

Fitting coilovers to a MagneRide-equipped C7 Corvette has always carried a catch: the instant you unplug the factory magnetic dampers, the cluster throws a ride-control fault and the car nags you on every start-up. This XYZ Racing coilover package for the 2013-2019 Chevrolet Corvette C7 ships with the electronic damping cancellation kit that closes that gap, emulating the magnetic strut circuit so the control module stays satisfied while you run a fully manual, height-adjustable setup.

That matters more on the Corvette than on most cars, because the C7 leaves the factory on transverse composite leaf springs rather than conventional coils. Converting to a coilover system is a genuine change in how the front and rear axles are sprung, and the cancellation kit is what lets you make that change cleanly on FE2 and FE4 magnetic-ride trims without a dash full of warnings.

What this coilover setup does for your 2013-2019 Chevrolet Corvette C7

Swapping the mono-leaf arrangement for height-adjustable coilovers gives you control the standard car never offered: corner-weight the chassis, drop the nose to suit the C7’s already low cowl, and set static ride height to clear track kerbs or a steep driveway. With the rear transaxle keeping weight planted over the driven wheels, a properly set spring and damper rate sharpens turn-in and steadies the back end through long, loaded corners where the leaf-sprung car can feel float-y. Independent damping adjustment lets you firm things up for a circuit session and back them off for the motorway home, all while the electronic damping cancellation keeps the factory electronics quiet.

About the coilover range

The XYZ Racing coilover for the C7 Corvette is a height-and-damping-adjustable system built to replace the leaf-spring suspension end to end. The range spans eight specifications – Super Sport, Top Sport, Racing Spec, Circuit Master, Drift Spec, Tarmac Rally, Gravel Rally and Pro Rally – so the same chassis can be set up for fast-road manners, sustained circuit work, drift entry angle or loose-surface compliance. Each kit pairs threaded ride-height adjustment with damper tuning, and every variant in this fitment family includes the cancellation hardware required to defeat the magnetic ride control system. You pick the spec to match how the car is used; the underlying conversion and the electronics workaround stay the same.

Fitment for the Chevrolet Corvette C7 (2013-2019)

This coilover family is built for the Chevrolet Corvette C7, chassis code CH04-C, across the full 2013-2019 model run. The bundled electronic damping cancellation kit is the version intended for cars originally fitted with Magnetic Selective Ride Control, covering the FE2 and FE4 magnetic-ride trims. Confirm your car carries the factory magnetic dampers before ordering this cancellation variant.

What buyers also search for

• Chevrolet Corvette C7 coilovers with MagneRide cancellation kit for 2013-2019 cars
• Corvette C7 leaf-spring to coilover conversion for road and track use
• Height-adjustable Corvette C7 suspension that clears the warning-light fault on magnetic-ride trims
• XYZ Racing Corvette C7 coilover spec options from fast road to full circuit
• 2013-2019 Corvette C7 ride-height and corner-weight adjustment for track setup

Pick the spec that matches how you drive your C7 and configure yours below.