XYZ Racing Pro Racing Drift Spec Coilovers — BMW 3 SERIES F80 M3 (Cancellation Kit for Electronic Damping) 2014-2018

The F80 M3’s S55 twin-turbo straight-six dumps its torque low in the range, and that early shove is exactly what lets the rear axle break traction on command – the foundation any drift build is working from. The XYZ Racing Pro Racing Drift Spec coilover is set up to harness it, keeping the body flat through fast transitions so the car holds a clean, controllable angle instead of pitching mid-slide.

This is a competition kit, not a fast-road compromise wearing a track badge. It includes a cancellation kit for the F80’s electronic damping, so M3s specified with Adaptive M Suspension lose the EDC dashboard fault when the factory dampers come off. In their place is a fully manual, mechanically adjustable platform built around drift control.

What this coilover does for your 2014-2018 Bmw 3 Series F80 M3 (Cancellation Kit for Electronic Damping)

Drop the ride height with the matched bump stroke and the F80 settles onto a stiffer, more predictable footprint you can load on entry and carry through the clip. The three adjustment knobs let you separate initiation behaviour from how the car recovers through the transition, keeping the rear progressive rather than snappy. With the electronic damping cancelled, there is no warning light and no factory damper logic second-guessing your inputs – the suspension does only what you set it to. The result is a chassis you can place on angle and lean on for a full competitive run, where the standard adaptive setup would be hunting for a comfort balance it was never asked to find.

About the Pro Racing Drift Spec coilover

The Pro Racing Drift Spec is engineered specifically for competitive drifting rather than adapted from a road kit. Its core job is to stabilise the body during high-speed, high-angle cornering so the driver can hold a consistent line and set the angle deliberately. Ride height comes down with a correctly matched bump stroke, and that pairing is what brings the drift control into its working window. Damping runs through three adjustment knobs feeding a small-orifice oil passage; over big hits that restricted passage can produce a faint noise as oil is forced through, which is normal behaviour and not a fault. The trade-off is intentional – this is a platform built for the relatively predictable surface of a circuit, where it shrugs off track bumps, not for soaking up broken public roads.

Fitment for the Bmw 3 Series F80 M3 (Cancellation Kit for Electronic Damping) (2014-2018)

This kit fits the F80-generation BMW 3 Series M3 built from 2014 to 2018, chassis code BM103-C. It is the variant supplied with the cancellation kit for electronic damping, so it suits M3s ordered with Adaptive M Suspension as well as those without. Confirm your car carries the F80 M3 chassis before ordering.

What buyers also search for

• Bmw 3 Series F80 M3 coilover setup for competitive drifting and circuit angle work
• F80 M3 suspension with electronic damping cancellation for Adaptive M Suspension cars
• Pro Racing Drift Spec three-knob adjustment for separate initiation and transition tuning
• 2014-2018 M3 ride height and bump stroke tuning for repeatable drift entries

Set your height, choose your damping and build your F80 M3 drift spec from the options in the configurator below.