Skip to content

Pro Racing Drift Spec

XYZ Racing Pro Racing Drift Spec Coilovers — BMW 2 SERIES G87 M2 (Modified Rear Integrated) (Cancellation Kit for Electronic Damping) 2023-2026

SKU: BM1281C-PRD

  • IncludesFull set of 4 (front + rear)
  • Top mountFront: Pillow ball + rubber / Hardened rubber · Rear: Aluminium
  • Lead time10–15 working days

Fits Bmw 2 SERIES G87 M2 (Modified Rear Integrated) (Cancellation Kit for Electronic Damping) (2023-2026) chassis BM1281C

Lead time: 10–15 working days from payment


£3,790.00

Made to order. Full payment is taken at checkout. Production begins once payment is confirmed.

Pay by card, Apple Pay, Google Pay — or Klarna on eligible orders.

XYZ Racing Pro Racing Drift Spec Coilovers — BMW 2 SERIES G87 M2 (Modified Rear Integrated) (Cancellation Kit for Electronic Damping) 2023-2026

The G87 M2’s factory-fit electronic adaptive dampers are tuned for road comfort and occasional track days, not the sustained oversteer, rapid direction changes and repeated big-angle transitions that competitive drifting demands. XYZ Racing’s Pro Racing Drift Spec coilover replaces that electronic system with a fully manual, three-way adjustable set-up designed around exactly that brief.

Because the M2 ships with damper control wired into the rear axle, this kit includes the cancellation integration needed to remove the factory electronic signal cleanly, so the car runs on manual damping without a warning light or a compromised ride. It’s built for drivers who’ve already decided this G87 is going sideways more often than it’s going in a straight line.

What this coilover does for your 2023-2026 Bmw 2 Series G87 M2 (Modified Rr Integrated) (Cancellation Kit for Electronic Damping)

Drop the ride height correctly and the G87 M2 pivots on-command rather than fighting you into a slide. The three-way damping adjustment lets you firm up compression for load transfer into the entry of a corner, then back off rebound so the rear axle can articulate through a long drift rather than skipping across the tarmac. Because the electronic damper cancellation is integrated at the rear, there’s no factory control unit second-guessing your settings mid-slide – the coilover, not the car’s software, decides how the rear behaves. That matters on an S58-powered chassis with this much torque on tap: predictable weight transfer is what turns big power into a controllable angle instead of a snap.

About the Pro Racing Drift Spec coilover

XYZ Racing built the Pro Racing Drift Spec line specifically around stabilising the car’s body through high-speed, high-angle cornering, the part of drift driving where most coilovers run out of usable travel and composure. Lower the G87 to the correct ride height with the right bump stroke set and the difference in how the car holds its line through a sustained slide is immediate. Each corner uses a three-knob adjustment layout, and the internal oil circuit runs through a deliberately small-bore passage – on a rough section of track that can produce a faint noise under compression, which is normal and not a fault. The kit is built for circuit and drift-track use, where repeated big hits and kerb strikes are the norm rather than the exception.

Fitment for the Bmw 2 Series G87 M2 (Modified Rr Integrated) (Cancellation Kit for Electronic Damping) (2023-2026)

This kit fits the Bmw 2 Series G87 M2 (Modified Rr Integrated) (Cancellation Kit for Electronic Damping), chassis code BM128-1-C, across the 2023-2026 model years. It’s specified for cars with the factory electronic damping system, since the rear integration and cancellation hardware needed to run manual damping is built into this kit rather than sold separately.

What buyers also search for

  • Bmw 2 Series G87 M2 coilover set-up for competitive drifting
  • G87 M2 electronic damper cancellation kit with manual three-way adjustment
  • Bmw M2 drift coilover ride height and bump stroke tuning for circuit use
  • G87 M2 rear suspension integration for cars swapping off factory electronic damping
  • Bmw 2 Series G87 M2 three-way damping adjustment for repeated drift-track sessions

Get the ride height and damping right for how you actually drive the G87 M2 – configure yours below.

This suspension is especially designed for Drift racing purpose. With its special design, it helps the racers stabilize the vehicle body while in high speed turning in order to make a perfect angle. It can also enhance drifting performance. After lowering the ride height with proper bump stroke, you will realize how we made the drift controlling to the excellent condition.

Because its 3 adjustment knobs with small oil hole design, when driving through big bumps, the coilover oil will go through small passage which might cause some small noise. This is normal situation. This product is made for circuit tracks and there will be no concern for bumps on the tracks.

Top mounts included with your kit

Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.

Front

  • Pillow ball + rubber top mountPillow ball + rubberP+Pillow-ball upper with a rubber insert — adds steering precision and camber adjustability while keeping some of the factory mount’s harshness damping.
  • Hardened rubber top mountHardened rubberRHardened rubber upper — firmer than the factory bush for tighter response while retaining road-friendly noise and vibration isolation.

Rear

  • Aluminium top mountAluminiumAAluminium upper mount — a stiff, lightweight housing that locates the damper precisely and resists flex under load.
Same car

Other products that fit this vehicle

Coilover ranges, brake kits and wheels for this car