XYZ Racing Street Advanced Coilovers — Volkswagen PASSAT B7 SEDAN 3C 4WD φ55 (Cancellation Kit for Electronic Damping) 2010-2015

The Passat B7 3C’s 4Motion layout carries a longitudinal engine and Haldex-driven rear axle over a chassis that was never light to begin with, and the factory DCC electronic dampers need to be cleanly defeated before any aftermarket set will behave predictably. This Street Advanced kit for the 2010-2015 Volkswagen Passat B7 Sedan pairs a full coilover install with a dedicated cancellation kit for that electronic damping control, so the car reads clean instead of throwing fault codes for a system that’s no longer there.

Street Advanced is XYZ Racing’s fast-road and occasional track-day spec – enough adjustment range to firm the 4WD Passat up for a B-road or a track day, without turning the daily commute into a chore.

What this coilover does for your 2010-2015 Volkswagen Passat B7 Sedan 3C 4WD

With 720 damping adjustment positions, there’s enough granularity to move well past a single fixed compromise setting on a car that carries real weight over the front axle and needs the rear kept in check under load transfer through the Haldex system. Ride height drops and body control firms up through direction changes, cutting the float that stock B7 suspension allows once you’re loading the outside dampers hard. Because the cancellation kit removes the OE electronic damping control from the equation, you get a mechanical, repeatable damper response instead of the DCC module second-guessing your settings. On a 4WD example of this chassis, that repeatability matters more than raw stiffness – the extra driveline weight means the coilovers are doing more work keeping the contact patches loaded evenly front to rear.

About the Street Advanced coilover

Street Advanced is XYZ Racing’s core street-and-track product, developed over years by the brand’s engineering team and proven through testing in racing events worldwide before reaching this production spec. It’s built for drivers who use the car on the road day to day but want a setup that holds together on a track day without swapping to a second set of dampers. The headline figure is 720 damping adjustment positions, giving a wide enough band to move between a comfort-leaning setting for motorway miles and a firmer setting for a circuit session. Construction follows XYZ’s standard coilover format, adjustable for both ride height and damping through the full range, and on this specific application it’s supplied with the cancellation kit needed to defeat the Passat B7’s factory electronic damping control – a part only required on DCC-equipped cars like this one.

Fitment for the Volkswagen Passat B7 (2010-2015)

This kit is built specifically for the Volkswagen Passat B7 Sedan, chassis code VO34-2-C, 4WD (4Motion) models fitted with φ55 strut diameter and factory electronic damping control, across the 2010 to 2015 production run. The cancellation kit is only required – and only supplied in this listing – for Passat B7 cars that left the factory with DCC.

What buyers also search for

• Volkswagen Passat B7 4Motion coilover upgrade for road and track use
• Passat B7 Street Advanced damping that stays usable outside of a track day
• Volkswagen Passat B7 DCC delete coilover kit with cancellation harness included
• Passat B7 Sedan 3C ride height and damping adjustment for a lowered stance

Spec on this platform is set by chassis, drivetrain and DCC fitment rather than trim level, so pick your Passat B7 4WD variant and configure yours below.