XYZ Racing Drift Spec Coilovers — Chevrolet CAMARO 4/6 CYL 2016-2026

Getting the sixth-generation Camaro to hold a big angle without the rear stepping out unpredictably comes down to controlling body roll and load transfer through the swap, not just lowering it. The XYZ Racing Drift Spec coilover for the Camaro 4/6 CYL is built around that specific job: keeping the chassis settled and predictable mid-drift so the driver, not the suspension, decides the angle.

This is a dedicated drift-discipline kit, not a fast-road or track-day compromise pressed into service. It is aimed squarely at drivers competing or practising in this Camaro on a drift circuit, where the priorities are stability under sustained yaw and a chassis that reacts the same way every pass.

What this coilover does for your 2016-2026 Chevrolet CAMARO 4/6 CYL

Drop the ride height correctly and set the bump stroke within the kit’s designed range, and the Camaro’s body control through high-speed transitions changes noticeably – less of the float and pitch that unsettles a car mid-drift, more of the body staying flat while the rear end does the work. That stability is what lets a driver commit to a bigger, more consistent angle rather than fighting a chassis that’s still moving underneath them. Because the setup is height-adjustable independent of spring preload, you can dial in the stance and geometry the Camaro’s drift line actually needs, rather than accepting whatever ride height the stock strut length gives you. The result on this car is a suspension that stops fighting the driver’s inputs and starts supporting them.

About the Drift Spec coilover

XYZ Racing built the Drift Spec line specifically around the demands of competitive drifting, where the loads on a chassis are different from a corner-carving track car – sustained lateral yaw, snap transitions, and a rear axle that needs to break traction on command and then hook back up cleanly. The design focuses on stabilising the vehicle body through high-speed turning so the car can hold a clean, controlled angle instead of snapping or wallowing. Ride height is adjustable with a proper bump stroke calculated into the kit, so lowering the car doesn’t come at the cost of the travel a drift car needs to absorb kerb strikes and transitions. The stated aim, in XYZ’s own words, is bringing drift control to an excellent condition – this is a kit engineered around one discipline rather than a general-purpose damper adapted for it.

Fitment for the Chevrolet CAMARO 4/6 CYL (2016-2026)

This kit is built for the Chevrolet Camaro 4/6 CYL, chassis code CH05, covering the 2016 to 2026 model years. Confirm your Camaro sits within that year span and matches the 4/6-cylinder variant before ordering, as fitment is specific to this generation.

What buyers also search for

• Chevrolet Camaro drift coilovers for competition-style angle and stability
• Camaro 4/6 CYL height-adjustable suspension for drift setups
• Chevrolet Camaro suspension for controlling body roll at high yaw angles
• CH05 chassis coilover kit for drift-specific ride height and bump stroke

Configure your Drift Spec coilovers for the Camaro 4/6 CYL below and select the spec that matches how you’re running the car.