XYZ Racing Drag Racing Coilovers — Apollo APOLLO N 2016-2017

A drag pass is won or lost in the first sixty feet, and the AP01-generation Apollo APOLLO N rewards a chassis that can put its launch loads down cleanly. These XYZ Racing Drag Racing coilovers are built for exactly that window – the violent weight shift off the line and the high-speed stability that follows once the car is hooked up and pulling.

Unlike a circuit setup that chases mid-corner balance, this kit is tuned around the straight line. The valving and ride-height control are there to manage how the APOLLO N loads its driven axle on launch, then keep it planted as terminal speed climbs through the traps.

What this coilover does for your 2016-2017 Apollo APOLLO N

On the line, the Drag Racing setup lets the APOLLO N transfer weight onto its driven wheels at the moment of launch, increasing the compression on the loaded tyres so they bite instead of spinning. That translates to less wheel slip, a shorter gap between throttle and forward motion, and a more repeatable sixty-foot time. Ride height is adjustable, so you can set static rake to suit your launch technique and tyre choice. As speed builds down the strip, the damping keeps the body settled and the car tracking straight, which matters as much for driver confidence as it does for the timing slip.

About the Drag Racing coilover

XYZ Racing developed the Drag Racing coilover specifically for 0 to 400 metre work, and the engineering brief shows in how it behaves. The system is set up to shift weight between the front and rear axles during instant, full-throttle driving, biasing load onto whichever wheels are putting power down – which is why the same design philosophy carries across front-wheel-drive, rear-wheel-drive and four-wheel-drive cars. By forcing greater compression into the driven tyres at launch, it cuts the dead time where a wheel spins without turning revs into distance. Once the car is moving, the focus turns to keeping it stable at high speed, so the chassis stays composed rather than nervous as the numbers climb. It is a single-purpose tool: built to launch hard, hook up, and hold a straight line.

Fitment for the Apollo APOLLO N (2016-2017)

This kit is matched to the AP01-chassis Apollo APOLLO N built between 2016 and 2017. Fitment covers that specific generation and year span – confirm your chassis code and build year against the listing before ordering, since this is a low-volume platform and spec can vary car to car.

What buyers also search for

• Apollo APOLLO N drag racing coilovers for quicker, more repeatable launches
• AP01 suspension upgrade focused on sixty-foot times and straight-line stability
• Apollo APOLLO N coilover setup for FWD, RWD or 4WD launch traction
• Height-adjustable drag coilovers to set launch rake on the 2016-2017 APOLLO N
• Apollo APOLLO N drag suspension that keeps the car planted at terminal speed

Set your ride height and launch rake to suit your strip and tyre package – configure your APOLLO N kit below.