XYZ Racing Pro Rally Coilovers — Scion XB bB 2003-2007

The first-generation Scion XB bB was never built to be quick across a stage. It carries its mass high and upright on a light front-wheel-drive footprint, and the factory damping lets that tall bodyshell lean and pitch the moment the surface turns loose. The XYZ Racing Pro Rally coilover for the Scion XB bB is the suspension that addresses exactly that, developed for gravel and snow rather than smooth tarmac.

This is competition hardware, not a fast-road lowering kit. The Pro Rally setup gives the SC03 the travel, control and ride height to soak up ruts, jumps and camber changes while keeping the contact patch working. For a 2003-2007 Scion XB bB being prepared for loose-surface events, it is the spec that matches the use case.

What this coilover does for your 2003-2007 Scion XB bB

On gravel and snow the gains are immediate and physical. The Pro Rally damping controls the tall body’s tendency to roll and pitch, so the nose stays settled into a corner and the rear follows rather than skating wide. Generous suspension travel lets the wheels track over broken surfaces and keep drive going down through the front axle, where a standard XB bB would skip and scrabble. Ride height is set for ground clearance over ruts and crests, not stance, and the firmer, more progressive control means you can read what the front end is doing through your hands and feet instead of guessing. The outcome is a light compact that rewards commitment on a stage instead of punishing it.

About the Pro Rally coilover

The Pro Rally sits in XYZ Racing’s dedicated rally line, built specifically for gravel and snow rather than circuit or road use. It is offered in two distinct build paths so the kit can match how far an entry has been prepared. The first is an amateur-level fit that bolts straight to the standard bodyshell, retaining the original mounting points and making it the sensible route for a near-stock car or a first build. The second is a professional-level fit intended for cars whose bodyshell has already been modified for competition, taking fuller advantage of revised geometry and mounting. Both share the same loose-surface philosophy: long-travel, high-control damping that keeps a light front-driver planted where grip is scarce and constantly changing. Choosing between them comes down to the state of the shell, not the ambition of the driver.

Fitment for the Scion XB bB (2003-2007)

This kit is specified for the first-generation Scion XB bB, chassis code SC03, covering the 2003 to 2007 model years. It is a direct application for that platform in standard form, with the professional build path available for shells modified for competition. Confirm your chassis code and build state before ordering.

What buyers also search for

• Scion XB bB rally coilovers for gravel and snow stages
• SC03 long-travel suspension for loose-surface competition
• Scion XB bB 2003-2007 rally suspension upgrade for a tall FWD compact
• Pro Rally coilover options for both standard and modified bodyshells
• Scion XB bB ground clearance and damping control for rough rally surfaces

Pick the amateur or professional build to suit your shell and configure your Scion XB bB Pro Rally coilovers below.