XYZ Racing Street Advanced Coilovers — Mitsubishi COLT RALLIART VERSION-R 2006-2013

The Colt Ralliart Version-R was always a busy front end: a turbocharged 1.5 driving the same axle that does the steering, wrapped in a short-wheelbase body that weighs barely over a tonne. That makes it quick to react but quick to misbehave too, with torque steer and a nose that wants to run wide when you lean on it. The XYZ Racing Street Advanced coilover for the Mitsubishi COLT RALLIART VERSION-R gives you proper control over how that eager little chassis settles, rides and turns.

This is the Street Advanced spec, built for enthusiast road use first and the occasional track day second. With 720 damping adjustment settings and ride height that comes down on your terms, it suits a Version-R that still has to survive British B-roads on the way to the circuit.

What this coilover does for your 2006-2013 Mitsubishi COLT RALLIART VERSION-R

Lower the Version-R on its springs and the first thing you feel is how much flatter it sits through a fast direction change, with far less of the nose-led roll the standard Colt carries into a turn. The 720 damping settings let you run a softer bump rate for broken town roads, then wind on more control before a track session without disturbing the ride height. On a light front-drive hatch like this, better body control keeps the inside front wheel loaded for longer, so you can put the turbo’s torque down earlier out of a corner instead of fighting the wheel. Brake hard into an apex and the front stays composed rather than diving onto its bump stops. The car ends up feeling shorter and more alert, which is exactly the character a Ralliart Version-R owner is chasing.

About the Street Advanced coilover

The Street Advanced sits at the heart of XYZ Racing’s range, the kit the company leans on most because it covers the widest spread of use. It has been developed over several years by XYZ’s own engineers and shaped by what they learned running cars in races worldwide, then brought back to a spec that genuinely works on the public road. The headline figure is 720 ways of damping adjustment, letting you move from comfort to firm in measured steps rather than a crude soft-or-hard switch. Height-adjustable lower mounts mean you set stance and corner balance independently of damper preload. It is built deliberately for the driver who uses one car for the daily commute and the odd track day, not a stripped-out competition machine. XYZ describe it as essential kit for anyone chasing more speed and sharper control, and on a turbo hatch that responds this readily to small chassis changes, that claim holds up.

Fitment for the Mitsubishi COLT RALLIART VERSION-R (2006-2013)

This kit is cut for the Mitsubishi COLT RALLIART VERSION-R, chassis code MT09, covering the 2006 to 2013 model years. It is a direct fit for the turbocharged Ralliart Version-R, distinct from the standard Colt range. Check your build year against the 2006-2013 span before ordering to confirm the match.

What buyers also search for

• Mitsubishi Colt Ralliart Version-R coilover upgrade for road and occasional track use
• Colt Version-R suspension that tames torque steer and front-end roll on a light turbo hatch
• Adjustable ride height for the MT09 Colt without losing everyday comfort
• 720-way damping coilovers for the 2006-2013 Mitsubishi Colt Ralliart
• Lowering kit for the Colt Ralliart Version-R that copes with rough British roads

Set your ride height and damping to suit your Version-R and the way you actually drive it – configure yours below.