XYZ Racing Pro Rally Coilovers — Hyundai TUCSON 2004-2009

The first-generation Tucson (chassis HY24) left the factory soft and tall: generous ride height, long-travel springs and an on-demand AWD system tuned for slippery commutes rather than competitive stages. The XYZ Racing Pro Rally coilover for the Hyundai Tucson 2004-2009 takes that loose-surface remit and sharpens it, replacing road-car compliance with damping you can actually load up over gravel and snow.

This is a stage-rally setup, not a tarmac lowering kit. The job here is keeping a high-sided crossover body composed through ruts, crests and off-camber loose sections, where usable wheel travel and damping that does not fade matter far more than static drop.

What this coilover does for your 2004-2009 Hyundai Tucson

On a loose surface the standard Tucson runs out of body control quickly, and the soft rear lets the back step wide before the AWD system can put the power down cleanly. The Pro Rally coilover gives you the travel and rebound control to keep all four contact patches working, so the car settles between inputs instead of floating on after them. Ride height is set for ground clearance and suspension travel rather than stance, which is what protects the underside on rough gravel. The result is a Tucson that tracks predictably over broken surfaces and lets you commit earlier on the throttle out of loose corners.

About the Pro Rally coilover

The Pro Rally is XYZ Racing’s dedicated gravel and snow competition suspension, built for the demands of loose-surface stages rather than smooth circuits. It is offered in two configurations. The first is an amateur-friendly setup that bolts directly to the original Tucson chassis with no bodywork changes, suiting club-level and regional gravel events. The second is a professional specification intended to be fitted after the car body has been modified for competition, freeing up the travel and geometry a top-flight build needs. Both share the loose-surface focus: long stroke, robust damping and the consistency required when a stage punishes the suspension stop after stop.

Fitment for the Hyundai Tucson (2004-2009)

This kit is matched to the first-generation Hyundai Tucson, chassis code HY24, covering the 2004 to 2009 model years. It fits the standard front MacPherson strut and rear suspension layout of that platform across the FWD and AWD versions.

What buyers also search for

• Hyundai Tucson gravel rally coilover for loose-surface stages
• Hyundai Tucson 2004-2009 long-travel suspension upgrade for snow and gravel
• Pro Rally coilover for an HY24 Tucson club or competition build
• Hyundai Tucson rally suspension with direct-fit and body-modified options

Set your spring and ride-height preferences and configure yours below.