XYZ Racing Racing Spec Coilovers — Yiqi BENTENG 2006-2026

The Yiqi一汽 Benteng (奔騰) arrived from the factory calibrated for Chinese urban roads – compliant, softly sprung, and thoroughly unsuited to sustained circuit work. For owners who have pushed the YI01 platform in time-attack trim, the stock dampers are the first component to address: they fade across back-to-back braking zones and leave the front axle with little support under heavy trail-braking loads.

Racing Spec coilovers from XYZ Racing were developed for exactly this scenario – serious track and time-attack competition rather than daily commuting. They bring the YI01 chassis a foundation the factory suspension was never asked to provide: controlled body movement under sustained circuit loads, repeatable damping response throughout a full session, and ride-height adjustability to bring the Benteng’s centre of gravity down to where track geometry can begin to work properly.

What this coilover does for your 2006-2026 Yiqi一汽 Benteng (奔騰)

Lowering the Benteng on the Racing Spec coilovers reduces the car’s centre of gravity and tightens the chassis response the standard setup leaves loose on circuit. Adjustable ride height lets you set the suspension to the specific demands of the track – an aggressive-kerb surface requires a different compromise than a smooth technical layout. The damper calibration was gathered through direct participation in WTCC events rather than simulated data, so the settings reflect what the YI01 platform actually encounters under real competition loads. Under hard braking the front end stays noticeably flatter, trail-braking inputs produce more predictable rotation, and the rear tracks through corners without the float the standard dampers introduce at the limit.

About the Racing Spec coilover

The Racing Spec is XYZ Racing’s track and competition-focused damper line, and the calibration behind each fitment was gathered through direct participation in events including WTCC rounds – not extrapolated from road-car data. The settings for this Benteng (奔騰) application address what the YI01 platform sees on circuit: repeated high-load compression and rebound cycles, aggressive braking events, and the need for consistent response from the opening stint to the close of a full session. For owners running heavily modified examples – upgraded engine packages, aggressive aero, or outputs substantially above standard – the Racing Spec programme extends to fully bespoke shock absorber specifications, developed around the complete list of modified components and the intended circuit environment.

Fitment for the Yiqi一汽 Benteng (奔騰) (2006-2026)

This fitment covers the Yiqi一汽 Benteng (奔騰) under chassis code YI01 across the full production span from 2006 to 2026. Verify your specific model year and body variant before ordering to confirm compatibility with your front and rear suspension geometry.

What buyers also search for

• Yiqi一汽 Benteng coilover suspension upgrade for track and time-attack competition
• FAW Benteng YI01 circuit-ready coilovers replacing comfort-calibrated factory dampers
• XYZ Racing Racing Spec coilover for Benteng (奔騰) with WTCC-derived damper settings
• Yiqi一汽 Benteng ride-height adjustable coilover kit for competition preparation
• Benteng 奔騰 coilovers for Chinese market saloon track and time-attack development

With WTCC-derived calibration and a bespoke-specification option for heavily modified cars, this is a serious setup for a Benteng being run as a genuine competition vehicle rather than a road car with occasional track outings. Select your spec and configure your order below.