XYZ Racing Drift Spec Coilovers — Chevrolet CORVETTE C7 Z06 2013-2026

Drifting a 650bhp supercharged Corvette starts with solving the C7’s biggest factory quirk: it leaves the production line on transverse composite leaf springs, not coils. The XYZ Racing Drift Spec coilover for the Chevrolet Corvette C7 Z06 replaces that arrangement with a proper height-adjustable damper at each corner, giving you the spring rates and ride-height control a competition drift car actually needs from the LT4’s wide, rear-driven chassis.

This is a setup built around one job – holding the body flat and predictable while the rear axle is lit up and the car is sitting at angle. Where the standard Z06 suspension is tuned for grip and lap times, the Drift Spec hardware is geared toward chassis stability through high-speed transitions and the kind of sustained slip that grip-focused dampers were never designed to take.

What these coilovers do for your 2013-2026 Chevrolet Corvette C7 Z06

Drop the ride height with the correct bump stroke and the Z06 stops floating mid-slide; weight settles onto the outside rear and the car holds its line where you put it. Body roll comes under control during fast direction changes, so initiation is sharper and the transition from one angle to the next stays composed. Front-end response tightens up, which matters when you are managing 650lb-ft through the eLSD and steering with the throttle. The result is a Corvette that telegraphs what the rear is doing rather than snapping away from you, letting you commit to deeper angles with confidence.

About the Drift Spec coilover

XYZ Racing builds the Drift Spec series specifically for competitive drifting rather than adapting a fast-road kit. The engineering priority is keeping the body stable during high-speed cornering so the driver can carry and hold a clean angle, with the damping and spring choice tuned to enhance drift performance rather than outright mechanical grip. The kit is designed to be run low, and XYZ specifies a proper bump stroke at that reduced ride height so the suspension still works through its travel instead of crashing into the stops. That combination – lowered stance with usable damper travel – is what XYZ identifies as the key to bringing drift control on the C7 Z06 into its best window.

Fitment for the Chevrolet Corvette C7 Z06 (2013-2026)

This kit is matched to the Z06 chassis of the C7-generation Corvette across the 2013-2026 fitment window. It is a corner-by-corner coilover conversion for the front-engine, rear-drive Z06 platform. Confirm your exact build year against the configurator before ordering.

What buyers also search for

• Chevrolet Corvette C7 Z06 coilovers for competition drifting and high-angle entries
• C7 Z06 leaf-spring to coilover conversion for adjustable ride height
• Corvette Z06 drift suspension that keeps the body flat through fast transitions
• XYZ Racing Drift Spec coilovers for a 650bhp supercharged Corvette
• C7 Corvette ride-height and damping setup for sustained slip angle

Set your ride height and corner balance to suit your track or event and configure your Drift Spec kit below.