XYZ Racing Drift Spec Coilovers — Apollo APOLLO N 2016-2017

The Apollo N is a low-volume, mid-engined hypercar built in tiny numbers, and that scarcity is exactly why a drift-spec coilover for the AP01 chassis is an unusual ask in the first place. If you are running one of these on a closed surface and want the rear axle to step out predictably under throttle, the XYZ Racing Drift Spec package is the suspension built around that single behaviour.

Drift Spec is XYZ Racing’s stiffest road-going damper platform, tuned for high-angle, high-slip-angle work rather than circuit lap times. On a chassis as rare as the AP01, that means a coilover that lets you commit to a line knowing the car will rotate on command and settle on the throttle, not pogo or skate.

What this coilover does for your 2016-2017 Apollo Apollo N

The Drift Spec gives the Apollo N a rear end that breaks away on input rather than on surprise, which is the whole point of running a dedicated drift damper instead of a circuit-biased one. Front-end bite increases the moment you turn in, because the higher spring rate refuses to roll the car onto its outside front tyre. Camber stays where you set it under load, so tyre wear evens out across a session rather than burning a single shoulder. Ride height is fully adjustable on the threaded body, letting you drop the AP01 to a workable centre of gravity without compromising shock travel. Damping adjustment lets you firm the rear for transition work or soften the front for grip recovery on cold tyres.

About the Drift Spec coilover

Drift Spec sits at the firm end of XYZ Racing’s range, with spring rates and valving chosen for sustained sideways work rather than long circuit stints. The construction is monotube, threaded-body, with separate ride-height and spring-perch adjustment so corner weighting stays sane after a height change. Damping is adjustable across a wide click range, which matters on a chassis this light because small valve changes produce big balance shifts. Pillowball top mounts deliver direct steering feel and quicker response on turn-in. The whole assembly is rebuildable and revalvable, so the kit can be re-sprung as the build evolves or as tyres change.

Fitment for the Apollo APOLLO N (2016-2017)

This kit is built specifically for the AP01 chassis Apollo Apollo N produced across the 2016 and 2017 model years. Given the platform’s exclusivity, confirm chassis code AP01 on your V5 and your existing damper mounting hardware before ordering.

What buyers also search for

• Apollo Apollo N coilover upgrade for high-angle drift work
• AP01 chassis suspension kit with rebuildable monotube dampers
• Apollo Apollo N adjustable ride-height coilover for low-volume hypercar builds
• 2016-2017 Apollo Apollo N drift suspension with pillowball top mounts
• Apollo Apollo N coilover with separate spring-perch and ride-height adjustment

Pick your spec, set your preferred spring rates and ride height, and build yours below.