Skip to content

Top Sport

XYZ Racing Top Sport Coilovers — Toyota SIENNA IV XL40 2020-2026

SKU: XL40-TS

  • IncludesFull set of 4 (front + rear)
  • Spring rate (F/R)18 / 4 kg/mm
  • Top mountPillow ball + rubber / Hardened rubber / OE (factory) mount
  • Lead time10–15 working days

Fits Toyota SIENNA IV XL40 (2020-2026) chassis XL40

Front spring rate (kg/mm)

18 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 18 kg/mm. A custom rate on this axle adds £80.00.

Rear spring rate (kg/mm)

4 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 4 kg/mm. A custom rate on this axle adds £80.00.

Configured price£1,290.00Inc. VAT

Lead time: 10–15 working days from payment


£1,290.00

Made to order. Full payment is taken at checkout. Production begins once payment is confirmed.

Pay by card, Apple Pay, Google Pay — or Klarna on eligible orders.

XYZ Racing Top Sport Coilovers — Toyota SIENNA IV XL40 2020-2026

The XL40 Sienna carries its mass high and soft. A two-tonne hybrid MPV tuned at the factory for hushed motorway comfort leans, pitches and wallows the moment you ask it to change direction with intent. The XYZ Racing Top Sport coilover for the Toyota Sienna IV XL40 exists to put a leash on that movement without turning the family hauler into something your passengers dread.

This is the occasional-track-day-and-daily-street spec in the range. It runs firmer than a street kit but stops well short of a stripped-out race setup, which suits a tall hybrid people-mover that still has to do school runs and airport hauls between any spirited driving.

What this coilover does for your 2020-2026 Toyota Sienna IV XL40

Top Sport runs roughly 30 to 50 percent more damping force and around 2kg/mm more spring rate than a street setting, and on a heavy XL40 you feel that as a van that finally settles. Body roll through roundabouts and slip roads is reined in, so the Sienna stops heaving onto its outside front tyre and tracking wide. The firmer rates control pitch under braking, which matters when you are hauling down two tonnes plus passengers from motorway speed. Height adjustment lets you drop the tall MPV stance to lower the centre of gravity and tidy the arch gap, while the added compression control keeps the chassis composed over expansion joints and broken tarmac instead of floating and recovering slowly. The result is a Sienna that turns in with intent and holds its line rather than leaning on the comfort tune.

About the Top Sport coilover

XYZ Racing build the Top Sport from their own circuit programme, then wind the aggression back to a level that stays usable on the road. The starting point is a deliberate step up from street tune – that 30 to 50 percent rise in damping and roughly 2kg/mm of extra spring rate – chosen so the suspension can absorb a hard hit rather than crash through it. Drive across a sharp ridge or a deep pothole and the damper soaks up the jolt, suppresses the shock travelling into the body, and keeps the tyre pressed into the surface so traction does not break loose mid-corner. That last point is the whole idea: a tyre that stays loaded is a tyre that steers and brakes. Height adjustability is built in, and the settings carry over from XYZ Racing’s Top Sport track experience, which is why the kit is pitched at track days and genuinely aggressive driving rather than a show-only drop.

Fitment for the Toyota Sienna IV XL40 (2020-2026)

This kit is matched to the fourth-generation XL40 Sienna built from 2020 to 2026. It is specified for that chassis code across the full model run, so confirm your van sits in the XL40 generation before ordering. No trim or drivetrain detail beyond the XL40 platform itself is listed in the supplied fitment data.

What buyers also search for

  • Toyota Sienna IV XL40 coilover upgrade for road and occasional track use
  • XL40 Sienna suspension that cuts body roll on a heavy hybrid MPV
  • Toyota Sienna IV height-adjustable coilovers to lower the factory stance
  • Top Sport damping for the 2020-2026 Sienna that stays daily-driveable
  • XL40 Sienna handling upgrade without a harsh stripped-out race ride

Set your ride height and choose your Top Sport spec for the XL40 Sienna in the configurator below.

By increasing 30~50% damping or 2kg/mm spring rate than street setting; it can absorb the impact of uneven pavement. It is able to absorb the jolt when across a big bumps, effectively suppress shock body and to increase tire’s traction. Vehicle stability makes you can experience perfect handling. All the settings from our Top Sport racing experience. It is suitable for track day and aggressive driving.

Top mounts included with your kit

Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.

  • Pillow ball + rubber top mountPillow ball + rubberP+Pillow-ball upper with a rubber insert — adds steering precision and camber adjustability while keeping some of the factory mount’s harshness damping.
  • Hardened rubber top mountHardened rubberRHardened rubber upper — firmer than the factory bush for tighter response while retaining road-friendly noise and vibration isolation.
  • OE (factory) mount top mountOE (factory) mountOERetains the OEM (factory) upper mount — preserves the original ride comfort, noise and vibration behaviour for a stock-like feel.
Same car

Other products that fit this vehicle

Coilover ranges, brake kits and wheels for this car