Skip to content

Tarmac Rally

XYZ Racing Tarmac Rally Coilovers — Toyota COROLLA E120/130 2001-2006

SKU: TO26-TR

  • IncludesFull set of 4 (front + rear)
  • Spring rate (F/R)20 / 5 kg/mm
  • Top mountPillow ball + rubber / Hardened rubber / OE (factory) mount
  • Lead time10–15 working days

Fits Toyota COROLLA E120/130 (2001-2006) chassis TO26

Front spring rate (kg/mm)

20 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 20 kg/mm. A custom rate on this axle adds £80.00.

Rear spring rate (kg/mm)

5 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 5 kg/mm. A custom rate on this axle adds £80.00.

Configured price£1,690.00Inc. VAT

Lead time: 10–15 working days from payment


£1,690.00

Made to order. Full payment is taken at checkout. Production begins once payment is confirmed.

Pay by card, Apple Pay, Google Pay — or Klarna on eligible orders.

XYZ Racing Tarmac Rally Coilovers — Toyota COROLLA E120/130 2001-2006

Sealed-stage tarmac rally asks a front-drive hatch like the E120/130 Corolla to put power down out of slow hairpins while staying composed over broken kerbs and mid-corner ridges. The XYZ Racing Tarmac Rally coilover is built for exactly that job: keeping the Corolla’s lightweight shell flat and the front tyres loaded at the point where a road damper runs out of travel and starts skating.

This is not a fast-road kit pressed into competition service. Every setting comes from XYZ Racing’s own tarmac rally programme, tuned to soak up the jolt of a big bump or a stage kerb without unsettling the car. For a 2001-2006 Corolla being prepped for sealed stages, hillclimbs or hard B-road work, it is the variant that matches the use case.

What this coilover does for your 2001-2006 Toyota Corolla E120/130

On the car, the first thing you notice is composure over surfaces that would have the standard suspension crashing through its bump stops. The damping is set to absorb the hit from a kerb strike or a sudden ridge, then settle straight away so the front axle keeps biting. That means more traction out of slow corners, where a light FWD Corolla otherwise scrabbles for grip, and a more predictable rear on a torsion-beam axle that can step out abruptly when provoked. Ride height drops for a lower centre of gravity, and the platform stays consistent as a stage deteriorates rather than going soft underneath you. The result is a Corolla you can lean on instead of one you are constantly catching.

About the Tarmac Rally coilover

The Tarmac Rally coilover sits at the motorsport end of the XYZ Racing range, developed specifically for sealed-stage tarmac competition rather than circuit or general fast-road use. Where a track damper chases a flat, low ride and a rough-stage unit chases wheel travel, this one threads the gap tarmac demands: enough compliance to absorb the impact of uneven pavement and big bumps, with enough control to suppress shock into the body and hold the car stable under hard direction changes. The damping is calibrated to increase tyre traction over rough sealed surfaces, which is precisely where stage times are won and lost on tarmac. XYZ Racing draws these settings directly from its own tarmac rally racing experience, so the baseline is a competition tune rather than a softened road compromise.

Fitment for the Toyota Corolla E120/130 (2001-2006)

This kit is matched to the Toyota Corolla E120/130 built between 2001 and 2006, catalogued under XYZ Racing’s TO26 chassis fitment. Confirm your model and registration year fall inside that 2001-2006 span before ordering, and check the spec selector below for any options specific to your car.

What buyers also search for

  • Toyota Corolla E120 tarmac rally coilover setup for sealed stages
  • Toyota Corolla E130 suspension upgrade for hillclimb and fast B-road work
  • Height-adjustable coilovers for a 2001-2006 Corolla rally build
  • Tarmac Rally damping that soaks up kerbs without losing front traction
  • Corolla E120/130 coilover settings derived from real tarmac rally use

Pick your spec for the E120/130 Corolla using the configurator below and build the setup that suits the stages you run.

This damper is designed for Tarmac Rally; it can absorb the impact of uneven pavement. It is able to absorb the jolt when across a big bumps, effectively suppress shock body and to increase tire’s traction. Vehicle stability makes you can experience perfect handling. All the settings from our Tarmac Rally racing experience.

Top mounts included with your kit

Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.

  • Pillow ball + rubber top mountPillow ball + rubberP+Pillow-ball upper with a rubber insert — adds steering precision and camber adjustability while keeping some of the factory mount’s harshness damping.
  • Hardened rubber top mountHardened rubberRHardened rubber upper — firmer than the factory bush for tighter response while retaining road-friendly noise and vibration isolation.
  • OE (factory) mount top mountOE (factory) mountOERetains the OEM (factory) upper mount — preserves the original ride comfort, noise and vibration behaviour for a stock-like feel.
Same car

Other products that fit this vehicle

Coilover ranges, brake kits and wheels for this car