Toyota CAMRY XV80 (BOLT HOLE 80mm) 2024-2026 — Coilovers

The XV80 Camry left the factory tuned for hushed motorway miles, not corner exits: soft springs, a tall ride height, and a hybrid drivetrain that parks real mass over the front axle. The XYZ Racing coilover range for the Toyota Camry XV80 (BOLT HOLE 80mm) 2024-2026 rebuilds that compromise from the damper up, trading float and body roll for control you can actually lean on.

Because this is a family listing, you pick the build that matches how you use the car: Super Sport for fast-road manners, Top Sport for track days, Racing Spec and Circuit Master for committed circuit work, Tarmac Rally for broken surfaces, and Drift Spec for running the rear loose. Each is set up around the XV80’s 80mm front strut mounting.

What this coilover does for your 2024-2026 Toyota Camry XV80

Lower the nose and you immediately attack the XV80’s worst road manner: the slow, floaty weight transfer that makes a heavy hybrid sedan feel reluctant to change direction. Height-adjustable spring perches let you close the wheel-arch gap and drop the centre of gravity, while damping adjustment firms up turn-in and settles the rear so the front bites instead of washing wide under load. On the road that reads as flatter cornering and tighter body control. On a circuit it means the front tyres stay loaded long enough to trust. The result is a Camry that responds to your inputs rather than insulating you from them.

About the XYZ Racing coilover range

Every kit in the XYZ Racing line for the Toyota Camry XV80 is an adjustable coilover, with ride height and damper stiffness set independently rather than locked together. The spring and valving spec steps up across the range: the road-biased Super Sport at one end, the stiffer Racing Spec and Circuit Master builds aimed at sustained track use at the other. Tarmac Rally trims the valving for compliance over rough surfaces, while Drift Spec adds the support a sideways car asks of its suspension. All variants use the 80mm front strut bolt-hole pattern specific to this Camry, so the lower mounts locate correctly without modification. Once the kit is fitted, the adjustability lets you corner-balance and fine-tune to taste.

Fitment for the Toyota Camry XV80 (2024-2026)

These kits fit the XV80-generation Toyota Camry built between 2024 and 2026, identified here by the 80mm front strut bolt-hole spacing. That measurement is what separates this listing from other XV80 variants, so check it against your car first. The internal chassis reference is TO96; confirm your strut mounting matches the 80mm bolt hole and you are on the correct kit.

What buyers also search for

• Toyota Camry XV80 coilover upgrade for lowering and sharper body control
• 2024-2026 Camry suspension that cuts factory float without ruining ride quality
• Toyota Camry XV80 coilovers with the 80mm front strut bolt-hole fitment
• Adjustable XV80 Camry coilover options spanning fast road to full circuit

Pick Super Sport, Top Sport, Racing Spec, Tarmac Rally, Drift Spec or Circuit Master and configure yours below to match your XV80 to the road or circuit you actually drive.