XYZ Racing Racing Spec Coilovers — Toyota CAMRY XV30 (TYPE 1) 2002-2006

The XV30 Camry was never tuned for a circuit. Toyota built it soft and nose-led, with the mass of the 1MZ V6 sitting ahead of the front axle line and a factory damper map that prioritises hushed motorway miles over body control. The XYZ Racing Racing Spec coilover exists to rewrite that brief, taking a comfort-biased saloon and giving it the platform stability needed for serious track and time-attack work.

This is the most focused tune in the range. Where the road-oriented kits chase a daily-usable compromise, the Racing Spec set is configured for grip, repeatable damping, and resistance to the heat and load a heavy front-drive sedan throws at its suspension under sustained lapping.

What this coilover does for your 2002-2006 Toyota Camry XV30 (TYPE 1)

The first thing you feel on the XV30 is the disappearance of the float. Drop the ride height and the centre of gravity follows, which directly attacks the roll and dive that make a standard Camry wash wide on turn-in. Tighter damping control keeps the loaded outer front tyre planted through long corners instead of letting the nose run on. Height adjustment lets you set corner weights and reduce the front-end bias this platform carries from the factory, so the car rotates rather than ploughs. On a 2002-2006 Camry being used as a track tool, that translates to braking confidence into the apex and a chassis that finally responds to inputs instead of absorbing them.

About the Racing Spec coilover

The Racing Spec damper is developed specifically for track racing, with its valving and settings derived from direct competition use including the WTCC touring car programme. That is the key distinction: this is not a road kit with stiffer springs, but a damper specification shaped by data gathered in actual race conditions. For cars running aggressive modifications – the kind of build that mirrors a factory-backed racer or an A-class competition car – XYZ Racing can also produce custom-made shock absorbers. Supply the detail on your car’s upgraded parts and the circuits you intend to run, and the damping can be built around that specific application rather than a generic curve. It is the most bespoke end of the coilover catalogue.

Fitment for the Toyota CAMRY XV30 (TYPE 1) (2002-2006)

This kit is built for the XV30 (TYPE 1) Camry, chassis code TO14, covering the 2002 to 2006 model years. Confirm your generation against the chassis code before ordering, as later Camry platforms use a different damper specification.

What buyers also search for

• Toyota Camry XV30 coilover kit for track and time-attack use
• WTCC-derived Racing Spec damping for a heavy front-drive saloon
• Toyota Camry suspension upgrade to cut body roll and understeer
• Custom-valved coilovers for a modified 2002-2006 Camry TO14
• Ride height and corner-weight adjustment for the XV30 platform

Set the spec that matches your car and your circuit, then configure yours below.