XYZ Racing · Made-to-order · UK shipping

Renault CLIO 2.0 (TYPE 2) 2001-2005 — Coilovers

The Clio’s 2.0 16v platform – the F4R-engined Renault Sport car – built its reputation on a torsion-beam rear axle that rotates on a trailing throttle. It is a light, front-driven hatch that lives on momentum, and the factory dampers let that playfulness slide into untidy body roll the moment you raise the pace. This XYZ Racing coilover range for the 2001-2005 Renault CLIO 2.0 (TYPE 2) is built to keep the lift-off rotation owners love while taking the slack out of the body control.

It is a family of six distinct builds rather than a single setup, spanning fast road through circuit and stage rally. All share ride-height adjustment and a damper character tuned for a sub-1,100kg chassis, so you choose the spec that matches how the car is actually used instead of compromising on a one-size tune.

What this coilover range does for your 2001-2005 Renault CLIO 2.0 (TYPE 2)

Dropping ride height closes the arch gap and lowers the roll centre, which sharpens turn-in on a Clio that already darts at the front. Tighter damping loads the front struts progressively under trail-braking, so the nose stops washing wide when you lean on it. The rear stays adjustable enough to preserve that signature throttle-off rotation, but now it settles rather than pitches. Because the platform is height-adjustable corner to corner, you can balance the torsion-beam rear and stop the inside wheel unloading mid-bend. Across the range, the damper options let you choose between road compliance and circuit body control.

About the coilover range

Each build in the line-up pairs a ride-height-adjustable threaded body with a damper tune matched to its discipline. Super Sport and Top Sport sit at the fast-road and track-day end, trading some stiffness for usable comfort on UK B-roads. Racing Spec and Circuit Master move toward committed circuit work with firmer control of roll and dive. Tarmac Rally is geared to stage surfaces and the loads that come with them, while Drift Spec targets angle and recovery. The common thread is independent height adjustment so you can set stance and corner balance to suit this specific Renault chassis.

Fitment for the Renault CLIO 2.0 (TYPE 2) (2001-2005)

This kit is specified for the Renault Clio 2.0 (Type 2), chassis code RE02, covering model years 2001 to 2005. That is the 2.0 16v Renault Sport derivative of the second-generation car, front strut and rear torsion-beam layout.