Porsche 992 CARRERA-2/S (without hydraulic lift system) 2019-2026 — Coilovers

Every 911 carries its engine behind the rear axle, and the 992 is no exception: that mass sitting out back is what gives the Carrera its traction off a corner and its appetite for rotation on the way in. A coilover kit for the 992 Carrera-2/S is less about taming the car and more about deciding how you want that rear-biased balance to behave – and whether you keep it composed on a B-road or sharpen it for the circuit.

This XYZ Racing coilover range is built for the 992 Carrera-2/S specifically without the factory hydraulic lift system, so the front struts match cars that never carried the nose-raise option. From fast-road damping through to full circuit and rally specifications, the range lets you set ride height and corner balance to suit how you actually use the car.

What this coilover does for your 2019-2026 Porsche 992 Carrera-2/S

Drop the 992 onto a set of these and the first thing you notice is body control: less squat as the rear loads up under power, less dive at the front under heavy braking into a slow corner. Lowering the centre of gravity tightens turn-in and reduces the float a softly sprung Carrera can show over crests. Independent ride-height adjustment lets you correct the slightly nose-high factory stance and set rake to taste, while damping adjustment on the relevant specs firms things up for a track session and softens off for the drive home. On a rear-engined car, that control over how the back axle settles is exactly what builds the confidence to lean on the throttle earlier.

About the XYZ Racing coilover range

The range spans nine specifications for the 992 Carrera-2/S, each tuned to a different job. Super Sport and Street Advanced lean toward fast-road use with a liveable ride; Top Sport and Circuit Master shift toward track work with firmer control; Racing Spec is the hard-edged circuit option. For loose surfaces there are Tarmac Rally, Gravel Rally and Pro Rally builds, plus Drift Spec for those chasing angle. All share threaded bodies for ride-height adjustment and are valved around the weight and balance of the 992 chassis rather than a generic application – which matters on a car as sensitive to spring rate and rake as a rear-engined 911.

Fitment for the Porsche 992 Carrera-2/S (2019-2026)

This kit fits the Porsche 992 Carrera-2 and Carrera-S, chassis code PO19, built from 2019 to 2026. It is specified for cars without the hydraulic front lift system. Confirm your car does not have the factory nose-lift option before ordering, as that option changes the front strut hardware.

What buyers also search for

• Porsche 992 Carrera-S coilovers for combined fast road and track day use
• 992-generation 911 suspension upgrade for cars built without the factory nose-lift option
• Porsche 992 Carrera-2 ride-height and rake adjustment coilover kit for stance and handling
• Carrera-2/S coilover specifications spanning fast road, circuit and loose-surface rally builds
• 992 Carrera height-adjustable coilovers valved for chassis code PO19

Compare the nine specifications, pick the one that matches how you drive your 992, and configure yours below.