Peugeot 407 2004-2010 — Coilovers

The Peugeot 407 carries its mass well forward – the long nose, the heavy HDi and V6 lumps sitting ahead of the front axle line – and the factory damping was tuned to smother that weight rather than control it. On standard springs the PE13 platform floats over crests and leans hard on turn-in, the soft setup masking a chassis that has more to give. An XYZ Racing coilover kit is where you take that control back.

This is the full coilover range for the 2004-2010 407, spanning fast-road through to circuit and rally specification. Each kit swaps the soft OEM struts for height-adjustable, damper-adjustable units, so you set the ride height and the body control to suit how the car is actually used.

What this coilover kit does for your 2004-2010 Peugeot 407

Drop the 407 onto its proper stance and the change is immediate – the standard arch gap on this car is generous, and closing it transforms the look. More importantly, adjustable damping lets you tie down that nose-heavy front end so the car stops diving under braking and rolling through long corners. Firmer, controlled spring rates keep the front tyres planted when you load them up, which on a front-driven 407 is exactly where the grip you are paying for lives. Set soft for the daily commute, wind in the compression and rebound for a track day, and the same hardware does both jobs.

About the coilover range

Every kit in the range is built around a height-adjustable threaded body with independent spring and damper assemblies, so corner height and damping are tuned separately rather than as a fixed package. The series ladder runs from Super Sport and Top Sport for road and fast-road use, through Racing Spec and Circuit Master for serious track work, to the specialist Tarmac Rally and Drift Spec setups. Damper-adjustable models give you a clickable range of stiffness so you can match the car to surface and use. Spring rates, valving and ride-height windows differ between the types, but the construction philosophy is shared: replace the comfort-first OEM tune with a setup you control, on a heavy front-drive saloon that responds well to being properly damped.

Fitment for the Peugeot 407 (2004-2010)

These kits are built for the Peugeot 407 on the PE13 platform, covering the 2004 to 2010 model years. Confirm your exact chassis and trim against the configurator before ordering, as spring rates and ride-height ranges are matched to the specific variant.

What buyers also search for

• Peugeot 407 coilovers for lowering and a tighter stance
• Peugeot 407 suspension upgrade for road and occasional track use
• height-adjustable 407 coilover kit to cure factory body roll
• damper-adjustable coilovers for the 2004-2010 Peugeot 407
• PE13 407 coilover options from fast-road through to circuit spec

Pick the spec that matches how you drive your 407 and configure yours below.