
The 308 T7’s suspension calibration reflects its brief: a comfortable, refined hatch for everyday use. PSA’s OEM damping rates suit the school run and the motorway well enough, but on a circuit or a fast B-road, that softness becomes a problem. Body roll transfers weight away from the loaded front tyre before the corner loads properly, and the front-drive chassis develops understeer earlier than the driver intended.
The XYZ Racing Top Sport coilover addresses the core issue with a step-change in damping force and spring rate, calibrated for drivers who mix T7 track sessions with regular road use in roughly equal measure.
What this coilover does for your 2007-2013 Peugeot 308 3D/5D
Firmer damping – 30 to 50 per cent above the street baseline – reduces body roll through quick direction changes and keeps the front tyres in closer contact with the surface over the broken tarmac found on most UK club circuits. With spring rates increased by 2 kg/mm over the OEM spec, compression events that would have pitched the 308’s body and disrupted the next corner entry are absorbed rather than transmitted through the car. Traction improves under power out of slow corners, where the original setup allows the inside front to unload excessively. Height adjustment lets drivers lower the T7’s centre of gravity without sacrificing the clearance needed between sessions.
About the Top Sport coilover
XYZ Racing built the Top Sport series around calibration drawn from their motorsport programme, targeting the gap between a soft street tune and a race-only setup that would be unliveable on public roads. Damping is rated 30 to 50 per cent stiffer than a street baseline, or spring rates increased by 2 kg/mm – numbers that represent a meaningful departure from OEM compliance rather than a marginal adjustment. The engineering targets the dual demand of absorbing large compression inputs (the deep potholes and circuit kerbs that catch harder setups off guard) while still suppressing bodyshell movement under aggressive driving. Settings across the Top Sport range were developed through XYZ’s own racing experience before the road-going specification was finalised, positioning the kit explicitly at track-day and spirited fast-road use.
Fitment for the Peugeot 308 3D/5D (T7) (2007-2013)
This kit is built for the Peugeot 308 in both three-door and five-door hatchback bodystyles across the full T7 production run from 2007 to 2013. Confirm your engine variant and trim level before ordering – suspension mounting dimensions across the T7 range should be verified against your specific car.
What buyers also search for
- Peugeot 308 T7 coilover upgrade for track day and fast-road driving
- Peugeot 308 3D/5D suspension kit that cuts body roll without removing daily driveability
- XYZ Racing coilovers for Peugeot 308 (2007-2013) with adjustable ride height
- Peugeot 308 T7 damping upgrade for aggressive driving and UK club circuit use
- Peugeot 308 front-drive handling improvement over OEM spring and damper rates
Select your specification and configure yours using the options below.
Top mounts included with your kit
Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.
OE (factory) mountOERetains the OEM (factory) upper mount — preserves the original ride comfort, noise and vibration behaviour for a stock-like feel.
Other products that fit this vehicle
Coilover ranges, brake kits and wheels for this car
-
Super SportXYZ Racing Super Sport Coilovers — Peugeot 308 3D/5D (T7) 2007-2013
£990.00 inc. VATView → -
Racing SpecXYZ Racing Racing Spec Coilovers — Peugeot 308 3D/5D (T7) 2007-2013
£1,690.00 inc. VATView → -
Tarmac RallyXYZ Racing Tarmac Rally Coilovers — Peugeot 308 3D/5D (T7) 2007-2013
£1,690.00 inc. VATView → -
Pro RallyXYZ Racing Pro Rally Coilovers — Peugeot 308 3D/5D (T7) 2007-2013
£6,000.00 inc. VATView → -
Drag RacingXYZ Racing Drag Racing Coilovers — Peugeot 308 3D/5D (T7) 2007-2013
£1,690.00 inc. VATView →
