XYZ Racing Super Sport Coilovers — Peugeot 308 3D/5D (T7) 2007-2013

The T7 308’s MacPherson front struts and torsion beam rear were calibrated for French-road compliance – soft enough to absorb surface imperfections, but with body roll that starts to limit cornering speed once the car is being pushed. Fitted across the T7 range from the 1.6 VTi to the 175bhp GTi, the XYZ Racing Super Sport coilover kit addresses that geometry directly: a fully adjustable system designed around both the daily commute and the weekend track session.

On the standard setup, the T7’s soft damping allows weight transfer under cornering to unload the inside front wheel – exactly where the front-wheel-drive drivetrain needs traction. Adjust the ride height lower and increase the damping rate, and the 308’s handling character changes: less lean through corners, more front-end authority, and a rear that holds its composure under load.

What this coilover does for your 2007-2013 Peugeot 308 3D/5D (T7)

Thirty-six damping positions cover the full range from a compliant road setting to a firm track configuration, giving the T7 a suspension that works on UK roads during the week and holds up at circuit pace at the weekend. Reducing the ride height cuts the centre of gravity and sharpens the car’s response to steering inputs – particularly significant on the GTi, where the 1.6 THP already puts considerable demand on the front axle under acceleration. The T7’s torsion beam rear also benefits from more controlled damping at speed, reining in the secondary body movement that can unsettle the car through quick direction changes.

About the Super Sport coilover

XYZ Racing’s Super Sport specification sits at the intersection of fast-road and weekend race use. The system uses height-adjustable spring perches to allow a lower ride height than the factory setting, reducing roll angle under cornering load. Thirty-six-way damping adjustment addresses the float and knock that worn or standard-spec dampers transmit on uneven surfaces at the softer end, and delivers circuit-capable stiffness at the other – making the Super Sport equally at home on a daily road drive as on a track, with the adjustment range providing the bridge between the two.

Fitment for the Peugeot 308 3D/5D (T7) (2007-2013)

This coilover kit covers the first-generation Peugeot 308 on the T7 platform, in both three-door and five-door body styles, across the full 2007-2013 production run. The T7 chassis code applies to petrol and diesel variants of this generation; the second-generation 308 moved to the T9 platform from 2013 and requires a different specification. Verify your chassis code against your VIN or V5C before ordering.

What buyers also search for

• Peugeot 308 T7 coilover kit for fast-road and weekend track use
• XYZ Racing Super Sport coilovers for Peugeot 308 2007-2013
• T7 308 suspension upgrade with 36-way adjustable damping
• Peugeot 308 GTi T7 ride height adjustment and damper upgrade
• 308 T7 coilovers for daily driving and circuit sessions

Select the specification that matches your T7’s setup and configure yours below – height and damping adjust independently to suit how the car gets used.