Skip to content

Gravel Rally

XYZ Racing Gravel Rally Coilovers — Nissan STAGEA WGNC34 4WD (Rear EYE) 1996-2001

SKU: NI58-GR

  • IncludesFull set of 4 (front + rear)
  • Spring rate (F/R)6 / 6 kg/mm
  • Top mountAluminium
  • Lead time10–15 working days

Fits Nissan STAGEA WGNC34 4WD (Rear EYE) (1996-2001) chassis NI58

Front spring rate (kg/mm)

6 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 6 kg/mm. A custom rate on this axle adds £80.00.

Rear spring rate (kg/mm)

6 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 6 kg/mm. A custom rate on this axle adds £80.00.

Configured price£1,690.00Inc. VAT

Lead time: 10–15 working days from payment


£1,690.00

Made to order. Full payment is taken at checkout. Production begins once payment is confirmed.

Pay by card, Apple Pay, Google Pay — or Klarna on eligible orders.

XYZ Racing Gravel Rally Coilovers — Nissan STAGEA WGNC34 4WD (Rear EYE) 1996-2001

The WGNC34 Stagea sits on R34 Skyline underpinnings while carrying the body mass of a full 4WD estate – a combination that creates specific problems on loose stages. The standard suspension geometry manages sealed roads well enough, but on gravel, silt, or snow the body pitches, wheel contact becomes intermittent, and the ATTESA AWD system can only compensate so far when the rear corners are skipping over broken ground at speed.

The XYZ Racing Gravel Rally coilover for the Nissan Stagea WGNC34 4WD was developed specifically for gravel-stage rally and rallycross conditions – not adapted from a road setup, but built from the ground up around what a competition car on loose surfaces actually requires.

What this coilover does for your 1996-2001 Nissan Stagea WGNC34 4WD

On a gravel stage, a heavy AWD estate needs every wheel staying in contact with the surface even as the road breaks up at speed. Extended travel in this kit means the suspension absorbs sustained impact sequences – the kind of repeated large hits that would bottom out a shorter-stroke unit – without pitching the Stagea’s considerable weight over the nose. The inverted tube construction resists lateral flex under the extreme cornering loads generated when the car’s mass shifts rapidly over the outside front during fast direction changes. Spring rates are validated specifically for rally-level loads rather than extrapolated from road data, meaning the car responds predictably under the G-forces a gravel competition generates.

About the Gravel Rally coilover

XYZ Racing designed the Gravel Rally around the specific demands of rallycross competition, which they regard as the harshest surface category a coilover will encounter. The inverted tube construction was chosen to cope with the structural demands of sandstone, snow, and silt stages, where conventional damper internals are put under sustained stress from unpredictable surface inputs. Long-stroke geometry works in conjunction with extended spring length to absorb chassis vibration from high-speed rough sections and manage the sharp G-force spikes produced during aggressive cornering on loose surfaces. Every spring rate setting in the range has been through validation by a rally racing team, ensuring the specification leaving the factory reflects actual competition calibration rather than workshop estimates.

Fitment for the Nissan Stagea WGNC34 4WD (1996-2001)

This application (chassis code NI58) covers the Nissan Stagea WGNC34 4WD with rear eye-type (Rr EYE) suspension mounting across the full 1996-2001 production run. Confirm the rear mount configuration before ordering – Stagea variants with a different rear mounting arrangement are a separate application.

What buyers also search for

  • Nissan Stagea WGNC34 coilover for gravel-stage rally and rallycross competition
  • WGNC34 4WD rally suspension with long travel and inverted tube design for rough surface use
  • XYZ Racing Gravel Rally coilover for Nissan Stagea 1996-2001 – spring rates validated by rally team testing
  • Nissan Stagea WGNC34 suspension for sandstone, snow, and silt stage conditions

Configure your Gravel Rally coilover for the WGNC34 4WD (Rr EYE) using the options below.

This damper is mainly design for Rally Racing or Rally Cross. In all racing events, road condition of Rally Cross is the most aggressive one. Hence, it means that the shock absorber is the most important utensil during the Rally gravel competition. We develop inverted tube design to meet each different road condition as sandstone, snow or silt. Long stroke and long spring which enable to absorb chassis vibration, aggressively attack from high speed bouncy road and bear extremely G-force when turning. All spring rate setting are tested by Rally Racing team.

Top mounts included with your kit

Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.

  • Aluminium top mountAluminiumAAluminium upper mount — a stiff, lightweight housing that locates the damper precisely and resists flex under load.
Same car

Other products that fit this vehicle

Coilover ranges, brake kits and wheels for this car