Skip to content

Drift Spec

XYZ Racing Drift Spec Coilovers — Nissan SKYLINE R34 (Rear EYE) 1999-2002

SKU: NI42-DS

  • IncludesFull set of 4 (front + rear)
  • Spring rate (F/R)12 / 14 kg/mm
  • Top mountAluminium
  • Lead time10–15 working days

Fits Nissan SKYLINE R34 (Rear EYE) (1999-2002) chassis NI42

Front spring rate (kg/mm)

12 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 12 kg/mm. A custom rate on this axle adds £80.00.

Rear spring rate (kg/mm)

14 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 14 kg/mm. A custom rate on this axle adds £80.00.

Configured price£1,690.00Inc. VAT

Lead time: 10–15 working days from payment


£1,690.00

Made to order. Full payment is taken at checkout. Production begins once payment is confirmed.

Pay by card, Apple Pay, Google Pay — or Klarna on eligible orders.

XYZ Racing Drift Spec Coilovers — Nissan SKYLINE R34 (Rear EYE) 1999-2002

The R34 Skyline’s longer wheelbase – wider than the S13 and S15 chassis that share the same drift paddock – gives it inherent stability mid-clip, but it also means you need to work harder to hold a committed angle without the geometry folding underneath you. On standard suspension, the body moves too freely under the lateral loads of sustained high-speed drifting, breaking the line before you’ve carried it through the corner.

These XYZ Racing Drift Spec coilovers for the 1999-2002 Skyline R34 are built around a single premise: maximum body control during high-speed directional changes, so the car sustains the angle the driver commits to rather than hunting for grip it was never supposed to find.

What this coilover does for your 1999-2002 Nissan SKYLINE R34 (Rr EYE)

The R34’s front-engine, rear-drive layout places the iron-block RB-series powerplant well forward; under sustained rotation that nose weight wants to drag the car straight. The Drift Spec calibration works against that tendency, keeping the body flatter through extended slip angles so the rear sustains its arc rather than snapping out. Ride height drops substantially over standard, lowering the centre of gravity in a way that directly sharpens the body’s response to steering input – faster, more legible, more repeatable. Critically, that height reduction comes with bump stroke calibrated for competition use: the suspension retains usable travel when the car is running close to its limits, which is precisely when you cannot afford the chassis to run out of suspension.

About the Drift Spec coilover

XYZ Racing’s Drift Spec series is designed specifically for competition drifting rather than road or fast-road use. The geometry and damper calibration target body stabilisation during high-speed turning – the sustained lateral loads that generate attack angle and hold it through a clip. A dedicated focus on bump stroke under lowered ride height distinguishes it from a sport street coilover used in anger: the spring and damper combination is matched to function correctly with the car close to the ground, not merely to look the part stationary. The outcome XYZ aim for is direct, controllable drift angle – a setup where the driver can read what the car is doing and act on it, rather than managing unpredictable body motion.

Fitment for the Nissan SKYLINE R34 (Rr EYE) (1999-2002)

This kit carries chassis code NI42 and covers the Nissan Skyline R34 produced from 1999 to 2002. The "Rr EYE" designation refers to the rear mount configuration for this variant – confirm your specific R34 uses this rear eye-type mount geometry before ordering. Coverage spans the full R34 production run.

What buyers also search for

  • Nissan Skyline R34 coilover for competitive drifting and sustained high-angle cornering
  • R34 NI42 suspension setup with body stabilisation under high lateral load
  • Skyline R34 ride height drop that retains bump stroke for drift use
  • XYZ Racing Drift Spec coilover for 1999-2002 Nissan Skyline RWD variants

Configure yours below; the fitment reference confirms the rear mount geometry you need to verify against your specific build.

This suspension is designed for Drift race especially. With its special design, it helps the racers stabilize the vehicle body while in high speed turning in order to make a perfect angle. It can also enhance drifting performance. After lowing the ride height with proper bump stroke, you will realize how we made the drift controlling to the excellent condition.

Top mounts included with your kit

Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.

  • Aluminium top mountAluminiumAAluminium upper mount — a stiff, lightweight housing that locates the damper precisely and resists flex under load.
Same car

Other products that fit this vehicle

Coilover ranges, brake kits and wheels for this car