XYZ Racing Pro Rally Coilovers — Nissan KICKS P15 (PCD: 5X114.3) 2020-2026

The Nissan Kicks P15 left the factory as a tall, soft-sprung front-wheel-drive crossover tuned for kerbs and speed bumps, not loose-surface stages. The XYZ Racing Pro Rally coilover rebuilds that brief from the ground up, swapping road-going compliance for a gravel and snow competition damper built to soak up stage abuse at speed.

Pro Rally is XYZ Racing’s top-flight rally hardware, not a fast-road kit wearing a competition badge. It comes in two forms: one that bolts to the standard Kicks shell for crews running close to a stock car, and a fully professional version intended for a bodyshell already modified to take it.

What this coilover does for your 2020-2026 Nissan Kicks P15

Drop the Pro Rally setup under a Kicks P15 and the car stops behaving like a supermini-based crossover the moment the surface turns loose. The gravel and snow valving keeps the tyres loaded over corrugations and ruts where the standard dampers skip and wash wide, so the front axle keeps biting on turn-in. Bump absorption is the priority, which means the suspension rides out stage hits that would bottom a road kit while still holding the body flat enough to place the nose accurately. For a high-sided front-driver, that mix of compliance and control is what lets you commit over crests and into bends you cannot see the exit of.

About the Pro Rally coilover

XYZ Racing builds the Pro Rally as a dedicated loose-surface competition suspension rather than a stiffened road damper, and it ships in two distinct configurations to match how serious the build is. The first bolts straight to the original Kicks chassis with no shell work, which suits crews running an effectively standard car or stepping up from club events. The second is the full professional specification, designed to be fitted after the bodyshell itself has been modified to accept it, freeing up travel and mounting geometry a standard shell cannot give. Both are engineered around gravel and snow use, where wheel travel, damping control over big inputs and durability across a stage matter far more than outright low ride height. Pick the version that matches your car’s level of preparation.

Fitment for the Nissan Kicks P15 (2020-2026)

This kit is cut for the Nissan Kicks P15, covering the 2020 to 2026 model years on the NI64-1 chassis with a 5×114.3 hub PCD. Confirm your car matches that chassis code and bolt pattern before ordering, then choose the amateur or professional fitment to suit whether your shell is standard or already modified.

What buyers also search for

• Nissan Kicks P15 rally suspension for gravel and snow stage use
• Nissan Kicks P15 coilover upgrade for loose-surface competition
• Pro Rally damping for the P15 that survives rough stage hits
• Nissan Kicks P15 5×114.3 coilover fitment for 2020-2026 cars
• Competition rally coilovers for a front-wheel-drive Kicks build

Pick the amateur or professional Pro Rally specification for your Kicks P15 and configure yours below.