XYZ Racing · Made-to-order · UK shipping

Nissan CUBE Z12 TYPE 1 2009-2014 — Coilovers

The Z12 Cube was never drawn to attack a corner. Its tall glasshouse, high roofline and soft factory springs give it a top-heavy gait that leans the instant you turn in – endearing on a school run, distinctly vague once the pace picks up. That same boxy, upright body is exactly why owners want it sitting lower and tied down harder.

This XYZ Racing coilover family for the Nissan CUBE Z12 TYPE 1 (2009-2014) replaces the spongy OEM setup with a height-adjustable platform and firmer, better-controlled damping. The range spans Super Sport for fast-road manners through to Top Sport, Racing Spec, Tarmac Rally, Drift Spec and Circuit Master, so you choose how aggressive the Cube’s new stance and rate actually are.

What this coilover does for your 2009-2014 Nissan CUBE Z12 TYPE 1

Drop the ride height and you immediately pull that tall body closer to the road, shrinking the wheel-arch gap that defines a standard Cube and lowering its centre of gravity. The stiffer spring and damper package reins in the front-led roll, so turn-in feels deliberate rather than floaty and the nose stops diving under braking. Because every kit is height-adjustable corner by corner, you can level the car, set the exact drop you want for show or daily use, and correct the slightly nose-down attitude these cars often wear. On a front-drive city car this is the single change that most transforms how planted it feels at motorway speed and through roundabouts.

About the XYZ Racing coilover range

Each XYZ Racing coilover is a full strut-and-spring assembly rather than a lowering spring bolted to a tired OEM damper, which is why the height and the control improve together. The threaded bodies let you wind ride height up or down independently at each corner, and the firmer-rated dampers are matched to the chosen series – softer and more compliant on Super Sport, progressively stiffer through Racing Spec and Circuit Master for harder use. The Drift Spec and Tarmac Rally options exist for owners chasing a more specialised setup. Across the family the goal is the same: take the Z12’s inherent body roll and soft travel out of the equation while keeping a Cube usable on broken UK roads.

Fitment for the Nissan CUBE Z12 TYPE 1 (2009-2014)

This kit is built for the Z12-generation Nissan CUBE TYPE 1 across the 2009 to 2014 model years. Confirm your car is the Z12 chassis before ordering; the year span and chassis match are what guarantee the strut lengths and mounting points line up.