XYZ Racing · Made-to-order · UK shipping

Mitsubishi LANCER (CHINA/ TAIWAN MARKET ONLY) 2017-2026 — Coilovers

The Lancer that carried the badge across China and Taiwan after the Evo bowed out is a front-drive sedan tuned soft from the showroom, with float over crests and lazy turn-in that hide whatever the chassis can really do. The XYZ Racing coilover range for the 2017-2026 Mitsubishi Lancer (chassis MT30-1) swaps that one-size compromise for ride height and damping you set yourself.

Because this Lancer was sold only in the China and Taiwan markets, suspension built specifically for the MT30-1 platform is thin on the ground. XYZ Racing covers it across eight tuning specs, from fast-road to full circuit and rally builds, so the kit matches how you actually use the car instead of forcing a single stiff setting on everyone.

What this coilover range does for your 2017-2026 Mitsubishi Lancer

A nose-heavy front-drive layout pushes wide when you load the front axle, and the factory dampers let the body lean before the tyres ever get to work. Adjustable spring rates and height let you drop the centre of gravity and cut that roll, so the front end bites on turn-in and the car settles faster mid-corner. Damping control means you can run a firmer edge for B-roads or a track day, then back it off for a long motorway run. The result is a Lancer that changes direction with intent rather than washing into understeer every time you commit.

About the XYZ Racing coilover range

Every spec in the range is a height-adjustable coilover with a hardened, corrosion-treated body and pillow-ball or rubber top mounts depending on application. The eight options split by intent: Street Advanced and Super Sport for daily and fast-road use, Top Sport and Circuit Master for track work, Racing Spec for outright pace, Tarmac and Gravel Rally for stage surfaces, and Drift Spec for high-angle steering and weight transfer. Damping-adjustable specs let you tune compression and rebound to the road or surface, while ride-height adjustment sets stance and corner balance. Spring rates climb with the spec, so the firmer kits trade some compliance for body control under hard loads.

Fitment for the Mitsubishi Lancer (2017-2026)

This kit is built for the China and Taiwan market Mitsubishi Lancer on the MT30-1 chassis, covering the 2017 to 2026 model years. Confirm your chassis code matches MT30-1 before ordering, as this platform is distinct from earlier global Lancer and Evo models.