XYZ Racing Pro Rally Coilovers — Mercedes-Benz CLS C218 4/6 CYL (Cancellation Kit for Electronic Damping) 2011-2018

The C218 CLS was never built to survive a rally stage – its factory air suspension and electronic damping exist to smooth motorway miles, not to shrug off compression events on loose surfaces. Fitting a Pro Rally coilover means replacing that entire philosophy with one built for repeated, uncontrolled impacts rather than controlled comfort.

This kit is aimed squarely at competitive gravel and snow use, not fast road driving. It comes with the cancellation kit needed to remove the CLS’s electronic damping dependency, so the car runs on mechanical, driver-set damping instead of software that was never designed for rally-spec loads.

What this coilover does for your 2011-2018 Mercedes Benz CLS

Rally-spec suspension has to deal with a completely different load case than track suspension: repeated big hits, unpredictable surface changes, and cornering forces that arrive without warning. On a 2011-2018 CLS C218, that means the kit has to manage a heavy four-door body over rough terrain without the compression events overwhelming the damper or the chassis mounts. The cancellation kit is what makes this viable at all on this generation – without it, the car’s electronics fight the mechanical setup and either fault out or default back toward the factory air-suspension logic. Once that’s removed, damping response is entirely in the driver’s hands, tuned for the terrain rather than for occupant comfort. Ride height and damping are set for stage work, not for a smooth ride to the shops.

About the Pro Rally coilover

XYZ Racing splits rally-oriented gravel and snow suspension into two distinct approaches. The first is an amateur-level setup that bolts onto the original chassis without further modification – a more accessible route for drivers running rally-style stages without a fully prepared car. The second, professional-level approach assumes the car body itself has been modified to suit competition use, and the suspension is built to match that more serious platform. The Pro Rally kit on the CLS C218 sits in this system as the top-flight option, engineered around the demands of genuine gravel and snow competition rather than road or circuit use. Construction and damping are set up around absorbing repeated hard impacts rather than fine incremental adjustment, which is the core difference between a rally coilover and a circuit-focused one.

Fitment for the Mercedes Benz CLS C218 4/6 CYL (cancellation Kit For Electronic Damping) (2011-2018)

This kit is built for the Mercedes Benz CLS C218, chassis code ME20-1-C, covering both 4-cylinder and 6-cylinder variants across the 2011-2018 production run. It includes the cancellation kit required to disable the car’s electronic damping control, which is mandatory on this chassis before the mechanical coilover can function correctly.

What buyers also search for

• Mercedes Benz CLS C218 coilover conversion for gravel and snow rally use
• CLS C218 electronic damping cancellation kit for aftermarket suspension
• Mercedes Benz CLS rally suspension for the 2011-2018 chassis
• XYZ Racing Pro Rally coilover options for professional-level competition builds
• ME20-1-C chassis coilover kit for 4-cylinder and 6-cylinder CLS models

Configure your Pro Rally spec for the C218 CLS below, including the electronic damping cancellation kit required for this chassis.