XYZ Racing Drift Spec Coilovers — Mercedes-Benz C CLASS W204/S204 8 CYL (Cancellation Kit for Electronic Damping) 2007-2014

The W204/S204 C-Class’s V8 models left the factory with electronically controlled dampers tied into the car’s stability systems, which is precisely the wrong setup once you start deliberately unsettling the rear axle. XYZ Racing’s Drift Spec coilover kit replaces that hardware entirely, and this cancellation kit variant strips out the factory electronic damping control so the car reads the new fixed-rate dampers correctly instead of throwing warning lights or fighting your inputs mid-slide.

Built for competitive drifting rather than circuit lap times, this Mercedes Benz coilover kit is about controlling body movement through the transition, not chasing outright grip. For a live rear axle and a heavy nose putting power down through a V8, that distinction matters.

What this coilover does for your 2007-2014 Mercedes Benz C CLASS W204/S204

On a 2007-2014 Mercedes Benz C CLASS W204/S204 set up for drifting, the biggest gain is predictability at the point of weight transfer. Independent height and damping adjustment let you set the front end to load progressively into the entry, rather than diving and unsettling the rear the moment you lift or brake. Lowering the ride height with the correct bump stroke, as XYZ Racing spec it for this kit, keeps the body flat enough through the transition that the rear stays controllable rather than snapping loose. Because the electronic damping control is cancelled outright rather than worked around, there is no computer trying to correct the slide you are deliberately holding. The result is a chassis that answers steering and throttle inputs the way a drift car needs to, not the way a road-going W204 was originally tuned.

About the Drift Spec coilover

XYZ Racing built the Drift Spec range around competition drifting rather than adapting a circuit coilover for the job. The core aim is body control through high-speed direction changes: keeping the chassis stable enough that the driver can hold a consistent angle instead of correcting a car that is rolling or pitching mid-slide. That comes down to how the kit is set up on install – ride height is dropped with a bump stroke calculated for the drop, not just wound down on the spring perch, so the damper still has usable travel left once the car is loaded up sideways. On the W204/S204’s V8 cars this also means removing the factory electronic damping logic from the equation altogether, so the fixed valving XYZ Racing has tuned for drift use is what actually controls the car, with nothing overriding it.

Fitment for the Mercedes Benz C CLASS W204/S204 8 CYL (Cancellation Kit for Electronic Damping) (2007-2014)

This kit is specified for the Mercedes Benz C CLASS W204/S204 8-cylinder cars built between 2007 and 2014, chassis code ME07-C, and includes the cancellation kit needed on models that left the factory with electronically controlled damping. Confirm your car falls within that production window and carries the electronic damping system before ordering, since the cancellation hardware is specific to that setup.

What buyers also search for

• Mercedes Benz C CLASS W204/S204 drift coilovers for competition and practice days
• W204 C63 electronic damping cancellation kit for aftermarket coilover fitment
• Mercedes Benz C CLASS W204/S204 Drift Spec ride height and bump stroke setup
• V8 W204/S204 rear-wheel-drive coilover kit built for controlled oversteer
• Mercedes Benz C CLASS coilover kit for 2007-2014 electronically damped models

Configure your Drift Spec kit for the W204/S204 below and set the spec to match how you actually use the car.