Lexus UX (ZA10) 2019-2026 — Coilovers

The ZA10 UX rides on Toyota’s GA-C platform and leaves the factory tuned for hushed comfort: soft damping, a tall crossover ride height, and a centre of gravity the standard struts never quite keep in check through a quick direction change. XYZ Racing coilovers for the Lexus UX (ZA10) 2019-2026 hand back the control that comfort tune trades away, with adjustable ride height and damping in a single bolt-in assembly.

This is the range overview for the chassis. The XYZ Racing coilover family for the UX spans six specifications – Super Sport, Top Sport, Racing Spec, Tarmac Rally, Drift Spec and Circuit Master – so you can match the kit to how the car actually gets used rather than buying one compromise for every road.

What these coilovers do for your 2019-2026 Lexus UX (ZA10)

Lowering the ZA10 pulls the body down over the wheels and drops the high centre of gravity that makes a standard UX lean into roundabouts and motorway slip roads. With the float gone, the nose stays flatter under braking and the car settles faster after a crest instead of wallowing. Independent damping adjustment lets you firm things up for a B-road or wind it back for a broken urban surface, and the threaded height adjustment means you set the stance to clear the arches cleanly without rubbing. On the 250h, the extra hybrid battery and E-Four AWD hardware add mass toward the rear – a height-adjustable platform lets you level the car and balance how it sits corner to corner.

About the coilover range

Each kit in the range is a full coilover assembly that replaces the UX’s standard strut and spring, giving you ride height and damper control the factory parts simply don’t offer. The lighter, fast-road specifications focus on a settled stance and tidier body control for everyday driving, while the harder Racing Spec, Tarmac Rally and Circuit Master builds move toward stiffer rates and a wider adjustment window for committed use. Because the ZA10 is a comfort-biased crossover rather than a sports saloon, most UX owners land on the road-focused end of the range to cut roll and ride height without making the car punishing day to day. Drift Spec sits at the specialist end of the family. Choose the specification first, then set it to suit your car.

Fitment for the Lexus UX (ZA10) (2019-2026)

These coilovers are built for the Lexus UX ZA10 chassis across the 2019 to 2026 model years. Both front-drive and E-Four all-wheel-drive UX variants share the same GA-C platform architecture, so select the specification that matches your intended use and confirm your exact build at configuration.

What buyers also search for

• Lexus UX (ZA10) coilovers to lower the factory crossover ride height
• Adjustable damping coilovers for the 2019-2026 Lexus UX without a harsh daily ride
• UX 250h suspension upgrade that handles the hybrid’s rearward weight
• Lexus UX ZA10 height-adjustable coilovers for a flat, settled stance

Compare the six specifications and configure yours to your UX below.