Skip to content

Top Sport

XYZ Racing Top Sport Coilovers — Land Rover DEFENDER 110 (L663) 2020-2026

SKU: L663-TS

  • IncludesFull set of 4 (front + rear)
  • Spring rate (F/R)18 / 4 kg/mm
  • Top mountAluminium / OE (factory) mount
  • Lead time10–15 working days

Fits Land Rover DEFENDER 110 (L663) (2020-2026) chassis L663

Front spring rate (kg/mm)

18 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 18 kg/mm. A custom rate on this axle adds £80.00.

Rear spring rate (kg/mm)

4 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 4 kg/mm. A custom rate on this axle adds £80.00.

Configured price£1,290.00Inc. VAT

Lead time: 10–15 working days from payment


£1,290.00

Made to order. Full payment is taken at checkout. Production begins once payment is confirmed.

Pay by card, Apple Pay, Google Pay — or Klarna on eligible orders.

XYZ Racing Top Sport Coilovers — Land Rover DEFENDER 110 (L663) 2020-2026

The L663 Defender 110 is the first Defender ever built with independent front suspension – a fundamental shift from the live axle geometry that defined the nameplate for four decades. That engineering change created a vehicle genuinely at home on a fast B-road, but the standard damper calibration still prioritises compliance across broken terrain, and the L663’s considerable kerb weight amplifies body roll under spirited cornering in ways the factory tune cannot fully mask.

The XYZ Racing Top Sport coilover for the Land Rover Defender 110 L663 (2020-2026) closes that gap. Running a firmer spring rate and more aggressive damping than the street-comfort baseline, these are the coilovers for Defender owners who use performance driving days as a regular fixture and their Defender as everyday transport – not as a vehicle that spends its time on gravel tracks.

What this coilover does for your 2020-2026 Land Rover Defender 110

The L663’s platform carries substantial mass at each corner, and taming the resulting body motion requires meaningful increases in both spring rate and damping force over the factory tune. The Top Sport coilovers deliver a 2 kg/mm spring rate increase and 30 to 50 per cent more damping than a street-spec setup – which translates directly into flatter cornering, faster load transfer response, and better tyre contact under hard acceleration out of a bend. Where the standard suspension allows the Defender 110’s weight to lean and wallow under lateral load, the stiffer spring and firmer damper combination holds it level enough that the driver begins to feel what the chassis is actually doing. Reduced body pitch under braking also means the nose loads the front axle more consistently, sharpening turn-in response that can feel vague on the factory setup.

About the Top Sport coilover

XYZ Racing’s Top Sport range draws on direct track-day development: the spring rate and damping settings are extracted from the same test programme the brand uses in competition, then refined into a usable road-plus-track range. Spring rates run approximately 2 kg/mm stiffer than a standard road setup; damping sits 30 to 50 per cent firmer – enough to suppress the jolt across large bumps and control body motion over rough or undulating surfaces without making the Defender 110 intolerable on anything short of a freshly resurfaced circuit. The construction is designed to absorb impact from uneven pavement without the suspension running out of travel, keeping tyre contact consistent and vehicle stability predictable under aggressive inputs. The Top Sport line is explicitly calibrated for track days and committed fast-road driving.

Fitment for the Land Rover Defender 110 (2020-2026)

This XYZ Racing Top Sport coilover kit is designed for the Land Rover Defender 110 on the L663 platform, covering the full 2020 to 2026 model year span. Before ordering, confirm your build sheet against the standard coil spring suspension – L663 Defenders specified with Adaptive Dynamics air suspension require separate consultation, as this kit replaces the conventional spring and damper arrangement.

What buyers also search for

  • Land Rover Defender 110 L663 suspension upgrade for road and track use
  • L663 Defender 110 coilover kit to reduce body roll and improve cornering stability
  • XYZ Racing Top Sport coilovers for new-shape Defender with independent front suspension
  • Defender 110 2020-2026 damping upgrade for performance driving days

Set your ride height and configure your spec below.

By increasing 30~50% damping or 2kg/mm spring rate than street setting; it can absorb the impact of uneven pavement. It is able to absorb the jolt when across a big bumps, effectively suppress shock body and to increase tire’s traction. Vehicle stability makes you can experience perfect handling. All the settings from our Top Sport racing experience. It is suitable for track day and aggressive driving.

Top mounts included with your kit

Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.

  • Aluminium top mountAluminiumAAluminium upper mount — a stiff, lightweight housing that locates the damper precisely and resists flex under load.
  • OE (factory) mount top mountOE (factory) mountOERetains the OEM (factory) upper mount — preserves the original ride comfort, noise and vibration behaviour for a stock-like feel.
Same car

Other products that fit this vehicle

Coilover ranges, brake kits and wheels for this car