XYZ Racing · Made-to-order · UK shipping

Honda ODYSSEY RA1~RA5 (WISHBONE) 1995-1999 — Coilovers

The first-generation Honda Odyssey hid an Accord-derived chassis under its tall MPV body, double wishbones at every corner and a low floor that most people-carriers of the era could not match. That clever underpinning is also why it responds so well to a proper coilover kit: the geometry is willing, but the soft factory springs and long-travel damping leave the RA-series wallowing through direction changes and squatting under its nose-heavy transverse layout.

This XYZ Racing coilover set for the 1995-1999 Honda Odyssey RA1 to RA5 replaces that compliant factory setup with adjustable ride height and damping, tightening the body control without turning a family hauler into something unliveable. Whether you run the 2WD four-cylinder cars or the heavier RA5 V6, the kit lets you set the stance and firmness to suit how the van is actually used.

What this coilover does for your 1995-1999 Honda Odyssey

Drop the ride height and you immediately kill the worst of the Odyssey’s roll, which makes the steering feel quicker and the front end far more honest on turn-in. Damping adjustment lets you firm up the bump and rebound enough to stop the nose diving under braking, a real issue on a tall, front-biased platform carrying a V6 in the RA5. Lower the centre of gravity and the body stops heaving over crests and roundabouts, so passengers stop being thrown side to side. You keep enough travel for British B-roads while gaining the flat, planted feel the standard suspension never had. Set it soft for daily duties or wind it up for spirited driving and a sharper look.

About the XYZ Racing coilover range

Each kit is a full coilover assembly with height adjustment independent of damper preload, so you can sit the Odyssey low without sacrificing stroke or riding on the bump stops. Spring and valving choices are matched to the car’s weight and front-heavy balance, and the range spans several specifications for this chassis: Super Sport and Street Advanced for fast-road comfort, Top Sport and Circuit Master for harder track use, plus Racing Spec, Drift Spec, Tarmac Rally, Gravel Rally and Pro Rally builds for more focused jobs. The damper adjusters let you tune compression and rebound to taste, and the threaded bodies make corner-balancing and small ride-height tweaks straightforward once it is on the car.

Fitment for the Honda Odyssey (1995-1999)

This kit is built for the first-generation Honda Odyssey, chassis codes RA1 through RA5, across the 1995 to 1999 model years. It suits the double-wishbone "WISHBONE" platform, covering both the four-cylinder and V6 RA5 variants. Confirm your exact RA code before ordering so the spring rates and mounting match your car.