XYZ Racing · Made-to-order · UK shipping

Honda CL YA1 1996-2000 — Coilovers

Tracking down a proper coilover setup for a YA1-chassis Honda has never been simple. The CL YA1 sits in that awkward late-1990s pocket of the Honda range where off-the-shelf suspension support thinned out years ago, and the owners keeping these cars sharp into 2026 know the search well.

This XYZ Racing coilover family closes that gap for the Honda CL YA1. It is a fully fitted, ride-height and damping adjustable platform built to the YA1’s own mounting points, offered across eight setups so the kit matches how the car is actually used rather than forcing one generic spring rate on every owner.

What these coilovers do for your 1996-2000 Honda CL YA1

Swapping tired factory dampers for an adjustable coilover platform changes the YA1 immediately. Ride-height adjustment lets you set stance and corner balance without spacers or cut springs, while damping adjustment gives you body control matched to the surface you actually drive. On a chassis approaching thirty years old, fresh height-adjustable suspension restores composure that worn original units lost long ago, tightening turn-in and settling the car over mid-corner bumps. Across the eight available setups, spring and damper rates step up with intent, so a fast-road CL YA1 and a track-biased one are not asked to share the same compromise.

About the XYZ Racing coilover range

XYZ Racing builds these as a height and damping adjustable system rather than a fixed lowering kit. The YA1 family spans eight named specifications: Super Sport and Street Advanced for fast-road use, Top Sport and Circuit Master for circuit work, Racing Spec for committed track duty, Tarmac Rally and Gravel Rally for stage surfaces, and Drift Spec for the lock and balance a drift car needs. Each shares the same adjustable architecture but arrives with spring rates and valving chosen for its discipline. The owner picks the intended use first, then configures the rest, instead of buying a single rate and hoping it suits. It is a sensible way to cover a chassis as varied in ownership as the Honda CL YA1, where one car is a tidy daily and the next is a weekend project.

Fitment for the Honda CL YA1 (1996-2000)

This coilover family is cut to the YA1 chassis and covers Honda CL YA1 production from 1996 to 2000. Fitment is matched to the factory front and rear mounting points for that chassis code, so the kit bolts to the car the platform was designed around. Confirm your chassis code reads YA1 and your build year falls inside the 1996-2000 span before configuring.