Ford FALCON 1998-2008 — Coilovers

The Falcon carries its mass well forward – that 4.0-litre Barra six sits ahead of the front axle line, giving these big Australian rear-drivers a nose-led weight bias the factory dampers only ever softened, never solved. XYZ Racing’s coilover range for the 1998-2008 Ford Falcon is built to take that weight in hand: ride height, spring rate and damping you set yourself, instead of living with Ford’s one-size touring tune.

Across the AU, BA and BF cars this platform moved from its early live-axle-derived rear to Ford Australia’s Control Blade independent setup, and the performance climbed with it – the BA-on XR6 Turbo and the 5.4 V8 XR8 put serious load through the chassis. This range spans seven distinct specs, from fast-road through to circuit and drift builds, so the kit you fit matches what the car is actually asked to do.

What this coilover does for your 1998-2008 Ford Falcon

Height adjustment lets you pull the Falcon down off its factory arch gap and set a stance that suits the car without wrecking the geometry. Stiffer, properly matched spring rates rein in the body roll and the squat this long, heavy sedan piles on under the Barra’s mid-range torque, so the car stays flatter through a corner and settles faster over crests. On the specs that carry damping adjustment, you can firm things up for a track day and back them off for the commute on coarse-chip roads. The result is a Falcon that turns in with intent rather than leaning on its outside front and washing wide.

About the XYZ Racing coilover range

Each kit is a height-adjustable coilover assembly designed to replace the Falcon’s strut and spring as a unit. The range is structured by use-case rather than a single compromise spec: Super Sport and Top Sport lean toward fast-road and occasional-track use, Racing Spec and Circuit Master toward sustained circuit work, Drift Spec toward angle and lock for sideways driving, and Tarmac Rally and Pro Rally toward stage and gravel-adjacent surfaces. That spread lets a road-driven XR6 and a dedicated track BF run hardware tuned for their own jobs while sharing the same Falcon-specific platform fit.

Fitment for the Ford Falcon (1998-2008)

This range is catalogued to the Falcon FO03 platform across the 1998-2008 span, covering the AU, BA and BF generations of the model. Confirm your build year and body style against your chosen spec before you order, so the kit matches your exact car.

What buyers also search for

• Ford Falcon coilovers for road and track on the AU, BA and BF chassis
• 1998-2008 Falcon suspension upgrade to lower stance and sharpen turn-in
• Falcon XR6 and XR6 Turbo height-adjustable coilover options
• BA BF Falcon drift and circuit coilover specs in one range
• Adjustable Ford Falcon coilovers without losing daily driveability

Seven specs cover everything from a lowered street Falcon to a committed track or drift build – pick your spec and configure yours below.