XYZ Racing Tarmac Rally Coilovers — Chevrolet CORVETTE C8 Z06 (Cancellation Kit for Electronic Damping) 2020-2026

The C8 Z06 moved Corvette engineering behind the cabin for the first time, hanging the flat-plane LT6 over the rear axle and giving the car a weight bias no front-engined Corvette ever carried. On a sealed tarmac stage that rearward mass is both the strength and the risk: drive off a slow hairpin and traction is enormous, but a kerb strike or a mid-corner ridge can step the back end out before you have read it. The XYZ Racing Tarmac Rally coilover is valved for precisely that surface.

Because the 2020-2026 Z06 leaves the factory on electronic MagneRide damping, this kit includes the cancellation module that lets you pull the adaptive struts without the dash throwing a suspension fault. The result is a conventional, fully adjustable damper set whose tune comes straight from XYZ Racing’s tarmac rally programme.

What this coilover does for your 2020-2026 Chevrolet Corvette C8 Z06 (Cancellation Kit for Electronic Damping)

Swapping the MagneRide units for this Tarmac Rally setup gives you a damper that absorbs the jolt of broken pavement instead of transmitting it through the chassis. Over compressions, drainage channels and patched surfaces, the wheel stays loaded and the rear contact patch keeps working, so the Z06 puts its torque down rather than scrabbling. You get a calmer, more predictable platform when you load the car into a corner, and the manual adjustability means you can firm the rear to manage that mid-engine rotation or soften it for grip on a rougher stage. The cancellation kit keeps the instrument cluster clean throughout.

About the Tarmac Rally coilover

The Tarmac Rally damper is engineered to take the hits a stage car endures: large single bumps, ragged camber changes and uneven sealed surfaces. Its job is to soak the impact when the car crosses a big bump, suppress the shock reaching the bodyshell, and in doing so increase the tyre’s traction at the moment it matters. That stability is what turns a nervous car into one you can lean on through quick changes of direction. Every setting in this kit is drawn from XYZ Racing’s own tarmac rally competition experience rather than a generic road tune, which is why the valving leans toward compliance over outright stiffness. It pairs that absorption with the ride-height and adjustment range you expect from a full coilover.

Fitment for the Chevrolet Corvette C8 Z06 (2020-2026)

This kit is built for the CH07-C chassis Corvette C8 Z06 across the full 2020-2026 production span. It is the variant supplied with the cancellation kit for electronic damping, which is required to delete the car’s factory MagneRide system cleanly. Confirm your car carries the electronic adaptive dampers before fitting.

What buyers also search for

• Chevrolet Corvette C8 Z06 coilovers for sealed-stage tarmac rally use
• Corvette C8 Z06 MagneRide delete with electronic damping cancellation kit
• Tarmac Rally suspension that absorbs broken pavement without losing rear traction
• Adjustable Corvette C8 Z06 coilovers for 2020-2026 cars on CH07-C chassis

Set your ride height and damping to suit your stages and configure yours below.