XYZ Racing Racing Spec Coilovers — Chevrolet CORVETTE C8 Z06 (Cancellation Kit for Electronic Damping) 2020-2026

The C8 Z06’s mid-engine layout puts the mass behind the cabin, and with a flat-plane LT6 spinning to 8,600rpm that rearward weight bias rewards a damper that keeps the front loaded through quick changes of direction. The factory car runs Magnetic Ride Control, which is why this kit ships as a cancellation setup: the coilovers replace the adaptive electronic dampers, and the included kit suppresses the fault codes the car would otherwise throw once the magnetic units are gone.

The XYZ Racing Racing Spec coilover is the competition end of the range, built for serious track and time-attack use rather than fast-road softness. For a 2020-2026 Corvette C8 Z06 that already arrives with real aero and track intent from the factory, it hands you a manually adjustable platform to set ride height and damping to the job on the day.

What this coilover kit does for your 2020-2026 Chevrolet Corvette C8 Z06

Putting the C8 Z06 on a coilover platform drops the centre of gravity and lets you set corner balance and rake rather than accepting the factory ride height. The Racing Spec valving was developed for sustained circuit pace, so body control under heavy braking into a slow corner stays composed where the standard adaptive setup gives way. With the magnetic dampers removed, the response is mechanical and repeatable, and it does not shift in character as the electronics heat-cycle through a session. Height adjustment also helps you clear a wider track and chosen tyre without rubbing, and set the front-to-rear balance this mid-engine chassis is so sensitive to.

About the Racing Spec coilover

The Racing Spec sits at the competition end of the XYZ Racing coilover line, made specifically for track racing rather than road use. Its damper settings were not arrived at on a bench: XYZ developed them through direct participation in racing series including the WTCC touring car championship, so the baseline valving reflects what holds up under genuine race load. For cars that have moved well beyond standard – heavily upgraded builds, factory-style racing vehicles or A-class race cars – XYZ will produce custom-made shock absorbers rather than a fixed kit. If your C8 Z06 runs a specific aero, power or tyre package and you know the circuits you will race, you can supply the detail on the upgraded parts and intended track, and the dampers can be built around that combination.

Fitment for the Chevrolet Corvette C8 Z06 (2020-2026)

This kit is specified for the Chevrolet Corvette C8 Z06 under chassis code CH07-C, covering the 2020 to 2026 model years. It is the cancellation-kit version, built for cars fitted with the factory electronic Magnetic Ride damping and including the hardware needed to run coilovers in its place. Confirm your car carries the electronic damping setup before configuring.

What buyers also search for

• Chevrolet Corvette C8 Z06 coilover upgrade for serious track and time-attack use
• C8 Z06 MagneRide cancellation coilover kit for cars with factory electronic damping
• Corvette C8 Z06 height-adjustable suspension to set rake and corner balance
• Racing Spec coilovers with WTCC-derived damping for the 2020-2026 Corvette C8 Z06
• Custom-valved shock absorbers for heavily upgraded Corvette C8 Z06 race builds

The Racing Spec is the sharp end of the range for a circuit-driven C8 Z06 – configure yours below to set ride height and damping around the way you actually use the car.