Skip to content

Pro Rally

XYZ Racing Pro Rally Coilovers — Chevrolet CAMARO CONVERTIBLE 8 CYL 2011-2015

SKU: CH01D-PR

  • IncludesFull set of 4 (front + rear)
  • Top mountOE (factory) mount
  • Lead time10–15 working days

Fits Chevrolet CAMARO CONVERTIBLE 8 CYL (2011-2015) chassis CH01D

Lead time: 10–15 working days from payment


£6,000.00

Made to order. Full payment is taken at checkout. Production begins once payment is confirmed.

Pay by card, Apple Pay, Google Pay — or Klarna on eligible orders.

XYZ Racing Pro Rally Coilovers — Chevrolet CAMARO CONVERTIBLE 8 CYL 2011-2015

Drop the roof on a fifth-generation Camaro and the Convertible loses stiffness the coupe never has to account for – the open-top structure flexes under load in a way the fixed-roof car doesn’t, and putting that structure through rough, unsealed terrain asks more of the standard suspension than any Tarmac corner would. The XYZ Racing Pro Rally coilover is built around that reality rather than around a smooth road surface.

This is the range for the Camaro Convertible 8 CYL running in top-flight rally competition, not a fast-road upgrade wearing a rally label. Ride height, spring rate and damping are set up to cope with jumps, ruts and off-camber compressions rather than a consistent circuit surface, and the kit is specified to hold that control across a full stage rather than a single flying lap.

What this coilover brings to your 2011-2015 Chevrolet Camaro Convertible

Fit this kit and the biggest change is how the car behaves the moment the road stops being flat. Wheel control over compressions and crests improves because the damping is calibrated for repeated large inputs rather than gentle undulations, which matters given how much extra body flex the Convertible already carries compared with the coupe. Height and preload are adjustable, so the platform can be set to match the surface and the extra preparation weight a rally-run Camaro tends to carry, instead of living with one fixed factory setting. Because the range is built around stage use, it’s also set up to keep behaving consistently as the suspension works hard over distance, rather than losing composure as the run goes on.

About the Pro Rally coilover

XYZ Racing splits its rally-specification suspension into two distinct categories, and where the Pro Rally sits in that split matters. One category bolts straight onto the original chassis with no further preparation – an amateur-level setup. The other, the professional route, assumes the car’s body has already been modified to accept it, and that’s the level this Pro Rally kit is built for. In practice that means the kit is engineered as part of a properly prepared rally car rather than a drop-in upgrade for a standard road-going Camaro Convertible, and it’s specified with gravel and snow-stage conditions in mind rather than closed-circuit Tarmac. Expect a kit built around the demands of full competitive rally use on the Camaro’s V8 platform, not a softened compromise aimed at everyday driving.

Fitment for the Chevrolet Camaro Convertible (2011-2015)

This kit is specified for the Chevrolet Camaro Convertible 8 CYL, chassis code CH01-D, covering the 2011 to 2015 model years. Confirm your Camaro is the Convertible 8-cylinder variant within that window before ordering, since the coupe and 6-cylinder platforms use different hardware.

What buyers also search for

  • Chevrolet Camaro Convertible suspension for gravel and stage rally events
  • Camaro 2011-2015 Pro Rally coilover setup for competition use
  • V8 Camaro Convertible ride height and damping adjustment for rough-surface driving
  • Chevrolet Camaro rally-prepared suspension for the 8 CYL Convertible

Spec needs vary by stage, surface and how far the car’s been prepared beyond standard – configure yours below to match this Pro Rally kit to your Camaro Convertible build.

Rally gravel/snow suspensions are very professional suspensions and they are designed into two types:

1. Be installed directly with the original chassis. (Amateur type)
2. Be installed after modifying the car body. (Professional type)

Top mounts included with your kit

Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.

  • OE (factory) mount top mountOE (factory) mountOERetains the OEM (factory) upper mount — preserves the original ride comfort, noise and vibration behaviour for a stock-like feel.
Same car

Other products that fit this vehicle

Coilover ranges, brake kits and wheels for this car