Byd HAN DM / EV 2020-2026 — Coilovers

The Han’s weight is the whole story. With a floor-mounted Blade Battery pushing the DM plug-in hybrid and full-EV variants past two tonnes, the factory suspension is tuned for hushed refinement rather than body control, and on a B-road or a sustained sweeper that mass starts to float. The XYZ Racing coilover range for the BYD HAN DM / EV (2020-2026) is built to take command of that weight without turning a quiet executive saloon into something punishing.

Across the range – Super Sport through to Circuit Master – the common thread is height-adjustable, damper-controlled suspension that lowers an already-low centre of gravity further and stops the secondary movements an EV saloon this heavy is prone to. Pick the spec that matches how you drive, from settled fast-road manners to a firmer circuit setup.

What this coilover kit does for your 2020-2026 BYD HAN DM / EV

Lowering the Han tucks the wheels into the arches and drops the battery-low centre of gravity again, which sharpens turn-in and cuts the roll that soft OE springs allow under the car’s instant electric torque. Ride-height adjustment lets you set stance and corner balance to suit, whether you run the DM hybrid as a daily or push the dual-motor EV harder. The damping control brings rebound back under the chassis so the body settles quickly over crests and expansion joints instead of wallowing. On a heavy saloon, that recovered composure is what you feel first – the nose stops diving under hard braking and the rear stays planted when the motors load up.

About the XYZ Racing coilover range

Each kit in the range is a full coilover – spring and damper as one height-adjustable unit – replacing the comfort-led factory struts. Construction centres on a damper body with threaded height adjustment, so you set ride height independently of spring preload. The line spans Street Advanced and Super Sport for fast-road use, Top Sport and Circuit Master for track work, plus Racing Spec, Tarmac Rally and Drift Spec for dedicated motorsport disciplines. The track-oriented specs add damping adjustment, letting you tune compression and rebound to load a two-tonne EV chassis predictably. All of them are designed to carry the Han’s mass under hard use, where the standard dampers run out of control quickly.

Fitment for the BYD HAN DM / EV (2020-2026)

These coilovers are specified for the BYD HAN, chassis EV, covering both the DM plug-in hybrid and full-electric variants across the 2020 to 2026 model years. Confirm your exact variant and drivetrain when you configure, as spring rates are matched to the platform’s kerb weight.

What buyers also search for

• BYD HAN coilover upgrade to control EV saloon body roll
• BYD HAN DM / EV suspension lowering kit with adjustable ride height
• BYD HAN coilovers matched to a heavy electric platform’s spring rates
• BYD HAN DM / EV damping options spanning fast road to circuit

Choose your spring rate and damping spec for the Han below and build yours to match how you drive.