XYZ Racing Street Advanced Coilovers — BMW X1 F48 2016-2022

The F48 was the X1 that dropped rear-drive for BMW’s transverse UKL platform, and that shift defines how it handles: a tall, nose-led crossover body riding on soft factory springs that lean onto their outer edge the moment you load a roundabout or a slip road. On the standard setup the F48 floats over crests and takes its time settling, which is fine for the school run and frustrating the moment you want to carry speed through a sequence of bends.

The XYZ Racing Street Advanced coilover for the Bmw X1 F48 is built for owners who want to pull that body height down, tie the damping together and keep a compliant road ride. It is the comfort-biased adjustable kit in the range, so you set the stance and the firmness to suit your own roads rather than living with one fixed compromise.

What this coilover does for your 2016-2022 Bmw X1 F48

Drop the ride height and you immediately cut the F48’s high centre of gravity, which is the single biggest cause of its body roll as a raised crossover. The 720-way damping adjustment lets you firm up the rebound enough to stop the nose pitching under braking while leaving the low-speed compliance soft enough for broken UK tarmac. On a sDrive or xDrive X1 you feel it most in direction changes: the outer corner stays planted instead of rolling onto its sidewall, and turn-in becomes something you trust rather than wait for. Tyre wear evens out too, because the geometry sits closer to where the chassis was happiest.

About the Street Advanced coilover

Street Advanced is the kit XYZ’s engineering team developed over several seasons as their highest-volume road product, refined through testing in international competition before it reached production trim. It is aimed squarely at normal road use with occasional track-day duty, which matches how most F48 owners actually drive. The headline feature is 720 ways of damping adjustment from a single combined knob, so bump and rebound move together as you wind comfort up or down. Ride height is set independently of damper travel, which preserves suspension stroke rather than slamming the car onto its bump stops. The result is a coilover aimed at drivers who want more pace and tighter control without surrendering everyday usability.

Fitment for the Bmw X1 F48 (2016-2022)

This kit is specified for the F48-generation Bmw X1 built from 2016 to 2022, covering both sDrive front-drive and xDrive all-wheel-drive variants on the UKL platform. Confirm your chassis code reads F48 and check your build year falls inside the 2016-2022 span before configuring, since the earlier E84 X1 uses an entirely different rear-drive setup.

What buyers also search for

• Bmw X1 F48 coilovers for lowering ride height without a harsh daily ride
• F48 X1 suspension upgrade to cut body roll on a tall crossover
• Adjustable Bmw X1 F48 coilovers for road use with occasional track days
• Street Advanced damping for sDrive and xDrive F48 X1 models
• Bmw X1 F48 2016-2022 stance and handling setup with height adjustment

Set your ride height and damping preference and configure your F48 spec below.