
XYZ Racing Circuit Master Coilovers — BMW 3 SERIES E30 6 CYL OE φ51 (Front Welding Modified Rear Integrated) 1982-1992
SKU: BM06-CM
- IncludesFull set of 4 (front + rear)
- Spring rate (F/R)22 / 12 kg/mm
- Top mountFront: Pillow ball + rubber / Hardened rubber · Rear: Pillow ball
- Lead time10–15 working days
Fits Bmw 3 SERIES E30 6 CYL OE φ51 (Front Welding Modified Rear Integrated) (1982-1992) chassis BM06
Added to basket ✓

The E30’s inline-six sits further over the front axle than the four-cylinder cars in the range, and BMW never designed the strut top for a bolt-in coilover – that is why this XYZ Racing Circuit Master kit for the 3 Series E30 (OE φ51, front welding-modified, rear integrated) is built to be welded into the existing front strut housing rather than dropped straight in. For sustained circuit lap-time work, getting adjustable damping onto that welded front mount is what keeps the nose settled through direction changes instead of pattering over kerbs.
The rear end takes an integrated spring and damper unit rather than separate components, which keeps the semi-trailing-arm geometry doing its job without extra unsprung mass creeping in. On a car built between 1982 and 1992, that is the difference between a coilover kit that just drops the ride height and one that actually changes how the E30 rotates.
What this coilover does for your 1982-1992 Bmw 3 Series E30
With 9720 damping combinations available across the kit’s three external adjustment knobs, you can set compression and rebound independently front and rear rather than living with one compromise setting for both ends. That range matters on a car this light: small changes in damping force show up immediately in how the E30 loads its outside front tyre under trail braking, and in how quickly the semi-trailing-arm rear settles after a direction change. Because the front strut is welded into the OE φ51 housing rather than clamped to a stock top mount, the whole assembly stays rigid under load, so damping adjustments reach the tyre instead of being absorbed by mount flex. Ride height drops with the shorter housing, lowering the centre of gravity and tightening body roll through the E30’s naturally quick turn-in. Six-cylinder cars in particular will feel the front end holding its line under trail-braking that the factory struts could not manage once weight shifted forward under load.
About the Circuit Master coilover
Circuit Master sits at the top of XYZ Racing’s range, developed alongside the same programme that produces the brand’s Racing Spec, Drift Spec and Tarmac Rally dampers, and run through XYZ’s own racing teams competing on circuits worldwide. The headline figure is 9720 possible damping combinations, split across three external adjustment knobs, so the kit can be tuned to a specific track, tyre or driving style rather than left on one fixed valving. That fine-grained adjustment comes from a small-oil-hole internal design: over rough sections or kerbs you may hear a faint noise as damping oil passes through the restricted passage, which is a normal characteristic of this valving rather than a fault. The internals are built around repeated heat cycling and sustained high-frequency inputs, which is what circuit driving demands rather than long-distance comfort. For an E30 going onto track days rather than staying as a daily car, that focus is exactly what this kit is built to deliver.
Fitment for the Bmw 3 Series E30 (1982-1992)
This kit is mapped to the Bmw 3 Series E30 six-cylinder chassis (chassis code BM06), covering cars built between 1982 and 1992. The front struts are supplied to OE φ51 spec and are welded into the existing strut housing during fitting; the rear uses an integrated spring and damper assembly rather than separate components. Confirm your car sits within this six-cylinder E30 range before ordering, since the welded front mount is specific to this chassis code.
What buyers also search for
- Bmw 3 Series E30 coilover upgrade for road and track use
- Bmw E30 six-cylinder Circuit Master damping tuned for repeat track sessions
- Bmw 3 Series E30 front strut welding modification for coilover fitment
- E30 BM06 chassis adjustable coilover kit for cars built 1982-1992
- Bmw E30 rear integrated coilover for semi-trailing-arm suspension
Configure your Circuit Master spec for the E30 below to match the damping range to how you will actually use the car.
Because its 3 adjustment knobs with small oil hole design, when driving through big bumps, the coilover oil will go through small passage which might cause some small noise. This is normal situation. This product is made for circuit tracks and there will be no concern for bumps on the tracks.
Top mounts included with your kit
Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.
Front
Pillow ball + rubberP+Pillow-ball upper with a rubber insert — adds steering precision and camber adjustability while keeping some of the factory mount’s harshness damping.
Hardened rubberRHardened rubber upper — firmer than the factory bush for tighter response while retaining road-friendly noise and vibration isolation.
Rear
Pillow ballPSolid pillow-ball (spherical bearing) upper — chosen for rigidity and precise camber adjustment, the sharpest steering response of the options.
Other products that fit this vehicle
Coilover ranges, brake kits and wheels for this car
-
Super SportXYZ Racing Super Sport Coilovers — BMW 3 SERIES E30 6 CYL OE φ51 (Front Welding Modified Rear Integrated) 1982-1992
£1,190.00 inc. VATView → -
Top SportXYZ Racing Top Sport Coilovers — BMW 3 SERIES E30 6 CYL OE φ51 (Front Welding Modified Rear Integrated) 1982-1992
£1,390.00 inc. VATView → -
Racing SpecXYZ Racing Racing Spec Coilovers — BMW 3 SERIES E30 6 CYL OE φ51 (Front Welding Modified Rear Integrated) 1982-1992
£1,890.00 inc. VATView → -
Drag RacingXYZ Racing Drag Racing Coilovers — BMW 3 SERIES E30 6 CYL OE φ51 (Front Welding Modified Rear Integrated) 1982-1992
£1,890.00 inc. VATView → -
Tarmac RallyXYZ Racing Tarmac Rally Coilovers — BMW 3 SERIES E30 6 CYL OE φ51 (Front Welding Modified Rear Integrated) 1982-1992
£1,890.00 inc. VATView → -
Pro RallyXYZ Racing Pro Rally Coilovers — BMW 3 SERIES E30 6 CYL OE φ51 (Front Welding Modified Rear Integrated) 1982-1992
£6,000.00 inc. VATView → -
Drift SpecXYZ Racing Drift Spec Coilovers — BMW 3 SERIES E30 6 CYL OE φ51 (Front Welding Modified Rear Integrated) 1982-1992
£1,890.00 inc. VATView → -
Street AdvancedXYZ Racing Street Advanced Coilovers — BMW 3 SERIES E30 6 CYL OE φ51 (Front Welding Modified Rear Integrated) 1982-1992
£2,190.00 inc. VATView → -
Pro Racing Drift SpecXYZ Racing Pro Racing Drift Spec Coilovers — BMW 3 SERIES E30 6 CYL OE φ51 (Front Welding Modified Rear Integrated) 1982-1992
£3,390.00 inc. VATView →