XYZ Racing Drag Racing Coilovers — Audi A5 B8 COUPE 2007-2016

The B8 A5 carries its mass ahead of the front axle – a long longitudinal engine slung over the nose that defines how this coupe launches and loads its tyres. The XYZ Racing Drag Racing coilover for the Audi A5 B8 Coupe is built around that reality, set up specifically for 0-400 metre work rather than circuit lap times or fast-road comfort.

This is a launch-first suspension package. Where a track coilover chases mid-corner balance, the Drag Racing setup is tuned to manage weight transfer at the line and through the first hundred metres, planting the driven wheels and cutting the dead time before grip arrives.

What this coilover does for your 2007-2016 Audi A5 B8 Coupe

Off the line, the difference shows in how the A5 puts its power down. The damping settings let you bias weight onto the driven axle the instant you launch, forcing the drive tyres into greater compression so they bite instead of spinning up. On a quattro car that means cleaner four-wheel traction; on a converted two-wheel-drive setup it loads the working axle harder. Through the top end the same settings hold the body steady, keeping the car stable as speed builds rather than floating over its springs. The payoff is more consistent 60-foot times and a coupe that tracks straight when it matters.

About the Drag Racing coilover

The Drag Racing series is engineered narrowly: it exists to win 0-400 metre runs, and the valving reflects that. XYZ Racing built the kit to suit front-, rear- and four-wheel-drive applications, with a setting that deliberately shifts weight between the front and rear of the car at the moment of launch. By forcing greater compression into the driven tyre, the coilover cuts the idle time where a wheel spins without putting power to the road, and the same logic keeps the car composed and stable as terminal speed climbs. It is not a comfort kit and it does not pretend to be a circuit tool – every choice in the spring and damper serves traction off the line and stability at the far end of the strip.

Fitment for the Audi A5 B8 Coupe (2007-2016)

This kit is cut for the B8-generation Audi A5 Coupe, chassis code AU23, covering the 2007 to 2016 model years and the two-door coupe bodyshell specifically. Confirm your build year against the range above before configuring, since the B8 platform ran through several running changes across its life.

What buyers also search for

• Audi A5 B8 Coupe drag racing coilovers for 0-400 metre launches
• A5 B8 suspension that manages weight transfer off the line
• Drag-spec coilovers for quattro and two-wheel-drive A5 conversions
• Audi A5 B8 Coupe coilover setup for repeatable 60-foot times
• 2007-2016 A5 coilovers tuned for strip stability at terminal speed

Set your spring and damping spec for the strip and configure yours below.