XYZ Racing Street Advanced Coilovers — Audi A3 SPORTBACK 8V φ50 (Rear Multi-Link Suspension) Modified Rear Integrated 2012-2020

The A3 Sportback 8V’s multi-link rear axle, shared with the MQB-platform Golf 7 and Leon Mk3, gives this shape a genuinely composed rear end once the standard-fit dampers are past their best – body control fades first under load, long before the springs themselves give out. The XYZ Racing Street Advanced coilover kit fits this exact φ50-strut, multi-link-rear configuration on the 2012-2020 Audi A3 Sportback and restores that composure with a fully adjustable platform built for owners who split their mileage between the daily commute and the odd track day.

Street Advanced sits below XYZ’s full competition-spec coilovers but above a fixed-rate street kit, giving A3 Sportback owners the height and damping range to firm the car up for a B-road run on Saturday and soften it back off for the Monday motorway commute.

What this coilover does for your 2012-2020 Audi A3 Sportback

Fitted to the 8V’s multi-link rear, the kit’s 720-way damping adjustment lets you separate compression and rebound behaviour enough to chase out the wallow that shows up on this chassis as the factory dampers age, without turning the ride harsh for the school run. Independent ride height adjustment at each corner brings the A3 Sportback’s stance down evenly front to rear, correcting the slightly nose-light look the standard ride height gives this body style. On the multi-link rear specifically, tightening the damping curve reduces the small amount of toe change that shows up under trail-braking into a roundabout, sharpening turn-in without the car feeling nervous mid-corner. Because the kit is built around the φ50 strut body fitted to this generation, the extra spring rate over standard doesn’t come at the cost of strut flex under load.

About the Street Advanced coilover

XYZ Racing developed the Street Advanced line over several years, refining it through competition programmes run worldwide before bringing the spec down into this road-legal form. Each damper offers 720 individual points of adjustment, split across compression and rebound circuits, so the range runs from a genuinely compliant road setting through to something firm enough to hold its own on a track day without a rebuild. That range is the point of the Street Advanced name: it’s built as a dual-purpose kit for drivers who want one set of coilovers that covers commuting and occasional circuit use, rather than switching between two setups. Ride height sets independently of preload through an adjustable spring perch, so raising or lowering the car doesn’t quietly change your damping setting. For this A3 Sportback fitment specifically, the rear mount is a modified, integrated design built for the 8V’s multi-link geometry rather than a generic bolt-on adaptor, matched to the φ50 strut body used across this generation.

Fitment for the Audi A3 Sportback (2012-2020)

This kit is built for the 8V-generation Audi A3 Sportback produced between 2012 and 2020, specifically the φ50 strut, multi-link rear axle version identified under XYZ’s AU12-7 fitment code. It uses the modified, rear-integrated mount matched to this multi-link setup, so confirm your A3 Sportback carries the multi-link rear rather than a torsion-beam rear before ordering.

What buyers also search for

• Audi A3 Sportback 8V coilover upgrade for road and occasional track use
• Audi A3 Sportback multi-link rear suspension damping that stays composed on B-roads
• Audi A3 Sportback Street Advanced coilover height and damping adjustment
• Audi A3 8V φ50 strut coilover kit for the 2012-2020 Sportback
• Audi A3 Sportback ride height correction without losing everyday comfort

Every Street Advanced kit for the A3 Sportback lets you set your own balance between everyday comfort and track-day control – build yours below with your preferred height and damping baseline.