XYZ Racing Street Advanced Coilovers — Alfa Romeo MITO 2008-2020

The MiTo carries its weight over the nose, runs MacPherson struts up front and a torsion beam at the rear, and left the factory with damping tuned firm enough that broken UK B-roads can feel brittle long before the chassis actually runs short of grip. The XYZ Racing Street Advanced coilover for the Alfa Romeo MITO is built to close that gap: a height- and damping-adjustable kit that lets you settle the ride without giving up the eager, point-and-go front end these cars are bought for.

With 720 damping settings on tap, this is a coilover you set up around how you actually use the car. Soften it for the daily commute, firm it for a weekend blast or an occasional track day, and drop the ride height to take the visual slack out of the MiTo’s arches.

What these coilovers do for your 2008-2020 Alfa Romeo MITO

On a front-drive supermini like the MITO, body control at the front axle is everything, and the Street Advanced gives you direct control over it. Wind in more compression damping and the nose stops diving under hard braking into a roundabout, so the front tyres stay loaded and the car turns in cleaner. Back the rebound off and the torsion-beam rear stops skipping over mid-corner bumps. Lowering the centre of gravity sharpens turn-in and tightens up the stance, while the 720-way adjustment means you can recover a compliant motorway ride on the same kit you track at the weekend.

About the Street Advanced coilover

Street Advanced is XYZ Racing’s most popular kit, refined over several seasons by their engineering team and validated through international competition before reaching production. It is built specifically for the dual-purpose owner: a car that does the daily road miles and still gets driven hard on a track day. The headline feature is 720 increments of damping adjustment, giving genuinely fine control over both ride comfort and body control from a single set of dampers. Ride height is independently adjustable, so you set stance and corner balance separately from the damping curve. It is aimed at drivers who want speed and control on the road without running a stripped-out, one-note race spec.

Fitment for the Alfa Romeo MITO (2008-2020)

This kit is matched to the Alfa Romeo MITO, chassis code AL16, across the full 2008 to 2020 production run. It suits the front-wheel-drive MiTo range and bolts to the standard MacPherson front and torsion-beam rear mounting points.

What buyers also search for

• Alfa Romeo MITO coilover suspension upgrade for road and occasional track use
• Alfa Romeo MITO AL16 ride height and damping adjustment in one kit
• Street Advanced coilovers for a MITO that stays comfortable on the daily drive
• Alfa Romeo MITO lowering kit with adjustable stiffness for UK roads

Set your height, choose your damping starting point and configure your Alfa Romeo MITO Street Advanced kit below.